Two stroke micro tiller

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The transmission part of the two-stroke micro tiller adopts advanced high-frequency quenching technology, which has strong wear resistance. The connection teeth of the transmission part are accurate and tight, and the operation is smooth, greatly reducing the maintenance costs for users.

Product Details

　　Two stroke micro tilleruse

1. At the beginning of the task, the rotary tiller should be in a raised state. First, the power output shaft should be combined to increase the speed of the blade shaft to the rated speed, and then the rotary tiller should be lowered to gradually insert the blades into the soil to the desired depth. It is strictly prohibited to combine the power output shaft or sharply lower the rotary tiller after the blade enters the soil, in order to avoid bending or breaking the blade and increasing the load on the tractor.

2. In homework, it is advisable to travel at a low speed as much as possible, which can ensure the quality of the work, make the soil chunks finer, and reduce the wear and tear of the machinery. Pay attention to whether there is any noise or metal tapping sound from the rotary tiller, and observe the situation of broken soil and plowing depth. If there is any abnormality, the machine should be stopped immediately for inspection. Only after troubleshooting can the operation continue.

When turning on the ground, it is forbidden to work. The rotary tiller should be raised to lift the blades off the ground and reduce the tractor throttle to avoid damaging the blades. When lifting the rotary tiller, the tilt angle of the universal joint should be less than 30 degrees. If it is too large, it will produce impact noise, causing premature wear or damage.

When reversing, crossing embankments, and transferring land parcels, the rotary tiller should be lifted to its position and the power should be cut off to avoid damaging the machinery. If transferring to a distance, use a locking device to secure the rotary tiller.

5. After each shift, the rotary tiller should be maintained. Remove dirt and weeds from the blade, check the fastening of all connecting components, add lubricating oil to each lubrication point, and add butter to the universal joint to prevent further wear and tear..

　　Two stroke micro tillerOperating rules:

Before using the micro tiller, it is necessary to carefully read the user manual that comes with the micro tiller, and fully understand the structure, principle, adjustment, maintenance, and safety regulations of the micro tiller. Otherwise, the micro tiller cannot be operated to avoid safety issues for personnel and machinery.

2. Safety first, operators should pay special attention to the safety warning signs on the machine, understand the contents of the signs in detail, and strictly follow the procedures for operation.

3. The operator of the micro tiller should wear work clothes as required to prevent clothing, hair, towels, and other non compliant clothing and accessories from being entangled by moving parts and causing injury. At the same time, it is necessary to ensure the safety protection of all exposed rotating parts to reduce the occurrence of accidents.

Before operating the micro tiller, all connecting bolts (including the engine support connection part, engine muffler, walking box part, pressure box part, air filter, etc.) should be tightened.

5. Before starting the engine, pay attention to checking whether the clutch is in the disengaged position and whether the gear lever is in neutral (gear start is not allowed). Before driving, special attention should be paid to issuing signals to warn nearby personnel to leave the equipment and enter a safe zone. Special attention should be paid not to let children approach the equipment; When starting the engine, if any abnormal noise is detected, stop the vehicle immediately and turn off the engine for inspection.

6. It is strictly prohibited to operate the micro tiller when fatigued or under the influence of alcohol. When changing personnel or removing weeds from the knife holder, be sure to turn off the engine before proceeding; New machines are not allowed to operate at high loads, and tires should be replaced during field transfers.

7. It is strictly prohibited to work in mountainous areas or fields with steep slopes. When working on slopes, precautions should be taken to prevent the micro tiller from tipping over and injuring people. When moving fields or crossing ditches, the machine must be turned off and manually moved; When replacing rotary tillage blades, the machine must be turned off and the power cut off.

When refueling, the engine must be turned off and smoking is strictly prohibited on site to prevent fires.

9. Do not hand over the micro tiller to personnel who are not familiar with its operation to avoid safety accidents.