Household two-stroke hand-held micro tiller

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The transmission part of the household two-stroke hand-held micro tiller adopts advanced high-frequency quenching technology, which has strong wear resistance, accurate and tight gear connection, smooth operation, and greatly reduces the maintenance cost for users.

Product Details

　　Household two-stroke hand-held micro tillerFeatures:

1. The speed parameters for fast, slow, and reverse gears are relatively reasonable;

2. Using branded engines as power, the power reliability is good;

3. The whole machine is lightweight and small in size. Suitable for use in greenhouses, orchards, vineyards, terraced fields, slopes, and small plots of land

4. Adopting belt transmission can reduce the impact force on the power mechanism and provide certain protection for the engine

5. The handle can rotate up, down, left, and right, with flexible operation.

6. Replacement tools can be used for rotary tillage, loosening soil, weeding, sowing, trenching, ridge formation, etc

7. Full surround mud blocking, making it safer and more reassuring for you to use

8. Optional electric start, easier to start

　　Household two-stroke hand-held micro tilleruse

1. At the beginning of the task, the rotary tiller should be in a raised state. First, the power output shaft should be combined to increase the speed of the blade shaft to the rated speed, and then the rotary tiller should be lowered to gradually insert the blades into the soil to the desired depth. It is strictly prohibited to combine the power output shaft or sharply lower the rotary tiller after the blade enters the soil, in order to avoid bending or breaking the blade and increasing the load on the tractor.

2. In homework, it is advisable to travel at a low speed as much as possible, which can ensure the quality of the work, make the soil chunks finer, and reduce the wear and tear of the machinery. Pay attention to whether there is any noise or metal tapping sound from the rotary tiller, and observe the situation of broken soil and plowing depth. If there is any abnormality, the machine should be stopped immediately for inspection. Only after troubleshooting can the operation continue.

When turning on the ground, it is forbidden to work. The rotary tiller should be raised to lift the blades off the ground and reduce the tractor throttle to avoid damaging the blades. When lifting the rotary tiller, the tilt angle of the universal joint should be less than 30 degrees. If it is too large, it will produce impact noise, causing premature wear or damage.

When reversing, crossing embankments, and transferring land parcels, the rotary tiller should be lifted to its position and the power should be cut off to avoid damaging the machinery. If transferring to a distance, use a locking device to secure the rotary tiller.

5. After each shift, the rotary tiller should be maintained. Remove dirt and weeds from the blade, check the fastening of all connecting components, add lubricating oil to each lubrication point, and add butter to the universal joint to prevent further wear and tear..