Portable small gasoline water pump

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Portable small gasoline water pump: gasoline engine, float carburetor, 1.5-inch aluminum shell water pump. Lightweight and portable, easy to move, hand pulled start, easy to operate, orchard water pumping, vegetable garden watering, garden greening water pumping, portable two-stroke gasoline engine water pump, portable water pump

Product Details

　　Introduction to portable small gasoline water pump:The series of small and portable gasoline engine water pumps are lightweight, compact in size, and easy to use. They are mainly designed to meet the needs of temporary water intake and irrigation. Due to their light weight, small size, and portability, they are called portable gasoline engine water pumps. If you want to pump water out of a well, most water pumps do not have self-priming ability, while diesel engine water pumps with self-priming ability are bulky and heavy, making them difficult to move. Therefore, choosing this small 1-inch gasoline engine water pump is a good choice. When taking water from a river in the wild, due to the distance between the river and the shore, it is necessary to choose a self-priming pump with self-priming function to be competent. Choosing this household 1-inch gasoline engine water pump is also a good choice. The property management of the community often irrigates plants, irrigates and cleans roads. A portable 1-inch gasoline engine water pump is required.

Installation precautions:

Before use, be sure to add engine oil to the crankcase.

2. It is strictly prohibited to add gasoline while the engine is running.

3. Flammable materials are prohibited from being placed near the exhaust outlet of the muffler.

4. This machine should be placed on a flat surface for use.

5. Before use, be sure to add enough water to the pump body. The remaining water in the water pump has a high temperature and poses a risk of burns. Please be aware.

Before operating the water pump, it is necessary to install a filter at the end of the pump to prevent foreign objects from entering and blocking or damaging the internal components of the water pump.

7. The water pump is prohibited from pumping substances such as slurry water, waste engine oil, and alcohol.

8. Pay attention to gas detection when extracting water from the biogas pipeline chamber to prevent explosion hazards.

　　Portable small gasoline water pump # FormatStrongID_3#

1. Change the engine oil

When using, change the oil for the first time after the first month or 20 hours of use, and then change it every six months or 300 hours thereafter.

2. Maintenance of air filter oil filter

Clean the filter element with a non flammable or high ignition point solution and air dry it; Then immerse the filter element in clean engine oil, squeeze out excess oil, and reinstall it.

3. Spark plug maintenance

Visually inspect the spark plug for obvious wear or insulation ring breakage with gaps. If there are any issues, replace the spark plug with a new one. Measure the spark plug gap with a plug gauge, and the gap is 0.70-0.80 mm. If it does not meet the requirements, adjust the electrode to correct the gap and remove the carbon deposits.

4. Storage

If the gasoline engine water pump is not used for a long time and the last time it is shut down, first close the carburetor inlet valve and let the gasoline engine water pump automatically shut down (if not used for a long time, gasoline stored in the carburetor will damage the carburetor). Fill the impeller chamber with clean water from the inlet pipe until the sediment is removed. Finally, release the remaining fuel from the fuel tank and store it properly in a dedicated container. The whole machine should be stored in a cool, ventilated, and dry place.