Fence trimmer

NegotiableUpdate on 01/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The hedge trimmer can be used for hedge pruning, fruit tree pruning, horticultural pruning and shaping, goji berry pruning, blueberry pruning, tea tree pruning, etc.

Product Details

　　Fence trimmerIntroduction:

It mainly includes a gasoline engine, a transmission mechanism, a handle, a switch, and a blade mechanism. The power of the gasoline engine drives the blade mechanism to work through the transmission mechanism. The main handle is located at the rear of the machine, and the front handle is installed at the front of the machine housing. The front handle can rotate at a certain angle. Its feature is that the main handle is connected to the machine body through a telescopic rod, and at the connection between the main handle and the telescopic rod or between the telescopic rod and the machine body, it is connected through a rotating mechanism. The two sides of the hedge fence machine also include a pair of side handles, which are connected through telescopic rods and installed on the machine through telescopic mechanisms. At the connection with the machine, they are connected through a rotating mechanism. The operator can choose the grip method of the handle according to their needs and usage habits. The rotation angle and extension length are easy and convenient to operate, High work efficiency and small packaging size. .

　　Fence trimmerPrecautions

1) Wear safety gloves, safety shoes, and work clothes according to regulations.

2) Check whether the screws and nuts are securely connected, and whether the components are loose or damaged.

3) Check whether the ignition switch is flexible and whether there is any jamming; Is the shutdown cable connected properly.

4) Before use, it is necessary to run in at low speed for 2-5 minutes.

Start with 6 steps:

1) Turn on the shutdown switch.

2) Pull out the air damper (close).

3) Make sure the oil bubbles are filled with oil 5-8 times.

4) Slowly pull out the starting rope and feel resistance before pulling it out forcefully.

5) After hearing the sound of cylinder explosion, push forward the choke valve (open).

6) Pull the starting rope several times again to start the machine.