Vertical multifunctional specific gravity stone removal machine

NegotiableUpdate on 01/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

When the material flows from the feeding hopper to the middle section of the screen surface, the vertical multifunctional specific gravity stone remover is immediately subjected to the combined effect of top-down inclined airflow and mechanical movement of the screen surface, causing the denser sand and gravel to settle into the lower layer of the material and come into contact with the screen surface after automatic classification

Product Details

　　Vertical multifunctional specific gravity stone removal machineNotes:

(1) Operators should wear labor protection equipment, tighten their cuffs and hem, be clean and tidy without any rope ends, and tuck their hair into their work hats.

(2) Each shift is familiar with the performance and use of flour mill equipment.

(3) Before driving, check if all electrical components are well insulated and if the motor grounding is reliable. It is strictly prohibited to press the switch button with wet hands. Please have an electrician handle any issues.

(4) According to the operating regulations of the flour mill, dry flour should be added for one kneading, and overloading operation is not allowed.

(5) When meeting, pay attention to covering the box lid. Remember not to put your hands or other hard objects into the bucket to avoid dangerous accidents.

(6) When taking noodles, the power must be turned off. After the power is turned off and the machine is twisted and mixed, the shell should be tilted before taking it again. If it cannot be taken completely at once, it should be cut off with a knife before going to the car. It is not allowed for one person to take noodles and another person to take the car.

(7) Do not touch the rotating parts during operation. If abnormal sounds, looseness, debris, vibration, etc. are found, stop the vehicle immediately for inspection and maintenance.

(8) Regularly refuel according to machine maintenance requirements.

　　Vertical multifunctional specific gravity stone removal machineMaintenance and upkeep:

1. The stone removal sieve plate, uniform air door, inlet air door, and reverse air duct should maintain smooth airflow. If the sieve holes are blocked, they can be cleaned with a cleaning brush. Do not knock them to avoid deformation of the sieve plate and affecting the efficiency of the specific gravity stone removal machine. If there is wear and tear, it should be replaced in a timely manner. The fish scale hole sieve plate with double-sided protrusions can be flipped over for use.

2. Regularly check the temperature rise of the bearings, generally not exceeding room temperature of 25 ℃. The bearings should be cleaned and oil changed regularly.

3. Regularly check the stone content and material content in grains. If any abnormalities are found, analyze the reasons and take corresponding measures in a timely manner. Generally, the material content in stones should be controlled below 1%.

4. When parking, the material should be stopped first, then the air should be stopped, then the machine should be turned off, and finally the air door should be closed. After parking, a layer of material should be retained on the stone removal screen to facilitate normal stone discharge immediately during the next drive.

5. During the disassembly and maintenance process of the specific gravity stone removal machine, attention should be paid to preventing the loss and deformation of components, and the disassembly of components should be minimized as much as possible during maintenance. When assembling, the components must be assembled in their original positions with the longitudinal centerline of the frame as the axis of symmetry. The centerline of the screen body should coincide with the centerline of the frame, and the eccentric axis, eccentric connecting rod upper axis, swing rod upper and lower axes, and vibration motor transmission frame core axis should be horizontal and parallel to each other. The horizontal lines of each axis should be perpendicular to the longitudinal centerline of the sieve body, and the stone removal sieve plate should be horizontal along the width direction of the sieve plate.

6. After maintenance and assembly, the empty vehicle should run smoothly without any twisting or shaking. During calibration, heavy impurities of the same size can be placed in the middle or both sides of the discharge end width direction of the stone removal screen surface. If they can all move upward at the same time, it is normal; Conduct a feeding test again to observe the movement of materials and the situation of stone discharge; Then the feeding is interrupted, and there is a local blow through phenomenon near the stone outlet end. Under normal circumstances, the shape of the blow through is very symmetrical. If phenomena such as unilateral movement, vortices, and blind spots occur, they should be corrected immediately.