-
E-mail
1418093336@qq.com
-
Phone
18972655068
-
Address
China Fushui Development Avenue South Road, Anlu City, Hubei Province
Product Categories
Anlu Tianlong Machinery Co., Ltd
Suction gravity grain stone removal machine
NegotiableUpdate on 01/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
When the material flows from the feeding hopper to the middle section of the screen surface, it is immediately subjected to the combined effect of top-down inclined airflow and mechanical movement of the screen surface, causing the denser sand and gravel to settle into the lower layer of the material and come into contact with the screen surface after automatic classification
Product Details
Characteristics of suction gravity grain stone removal machine:
1. High stone removal efficiency, stone removal sieve plate with fish scale structure, suitable for grain processing plants with high stone content in raw grains.
2. Easy to operate and compact in structure.
3. Adjust the inclination angle of the stone slab within the range of 10-14 degrees for different materials to achieve the desired process effect.
4. External fan, fully sealed, dust-free, meets ideal environmental requirements. The reciprocating swing structure adopts rubber bearings at the joint, which has low vibration and noise.
5. The transmission adopts self-aligning bearings and anti loosening devices to make the mechanical performance more stable.
Suction gravity grain stone removal machineOperational precautions
(1) Operators should wear labor protection equipment, tighten their cuffs and hem, be clean and tidy without any rope ends, and tuck their hair into their work hats.
(2) Each shift is familiar with the performance and use of flour mill equipment.
(3) Before driving, check if all electrical components are well insulated and if the motor grounding is reliable. It is strictly prohibited to press the switch button with wet hands. Please have an electrician handle any issues.
(4) According to the operating regulations of the flour mill, dry flour should be added for one kneading, and overloading operation is not allowed.
(5) When meeting, pay attention to covering the box lid. Remember not to put your hands or other hard objects into the bucket to avoid dangerous accidents.
(6) When taking noodles, the power must be turned off. After the power is turned off and the machine is twisted and mixed, the shell should be tilted before taking it again. If it cannot be taken completely at once, it should be cut off with a knife before going to the car. It is not allowed for one person to take noodles and another person to take the car.
(7) Do not touch the rotating parts during operation. If abnormal sounds, looseness, debris, vibration, etc. are found, stop the vehicle immediately for inspection and maintenance.
(8) Regularly refuel according to machine maintenance requirements.
