How much is the high-speed submersible mixer for corrosion-resistant anaerobic tanks

NegotiableUpdate on 05/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The combination anti jamming sliding mechanism of the corrosion-resistant anaerobic tank submersible mixer is designed with a shaft sleeve positioning double bearing dust-proof pulley on the lifting mechanism to ensure that the pulley rotates flexibly and does not cause friction between the wheel flange and the supporting parts on both sides; A moderately movable pulley system is designed on the tail wing of the equipment to prevent self-locking with the guide rail and ensure smooth sliding; The base type load-bearing method of the underwater mixing mixer is supported by the base, ensuring stable operation and avoiding shaking and vibration caused by traditional guide rod load-bearing methods; Micro submersible transmission box, compact structure, smooth transmission, small volume, light weight, high efficiency, few faults, long service life

Product Details

Corrosion resistant anaerobic tank submersible mixerStructural advantages:

Shell: The material of the motor shell is 304 stainless steel, which is sufficient to withstand loads. Its surface is flat, and the rotating head is in a streamlined cone shape. Compact structure.

Guide rail system: composed of stainless steel square steel guide rods, lifting devices, stainless steel bottom supports, etc., with motors mounted on brackets. The lifting and lowering of the mixer can be freely adjusted, and the submersible mixer can be disassembled and installed without emptying the water tank. The entire weight of the machine is supported by its bracket, which bears the thrust generated during mixing.

Spiral propeller: The propeller is a three bladed self-cleaning type, stamped as a whole. And it has passed the G6.3 level dynamic balance inspection. The propeller and shaft are connected by keys for transmission, and they do not loosen during rotation. The propeller shaft is isolated from the stirred medium.

Shaft: The shaft of the submersible mixer is made of wear-resistant stainless steel 2Cr13, and the propeller and motor shafts can withstand all axial and radial loads. The propeller shaft is protected by a mechanical seal and isolated from the stirring medium.

Bearing: The machine shaft is placed on two ball bearings and can withstand radial and axial forces. The design lifespan of the bearing is 50000 hours.

Shaft seal: A mechanical seal is equipped between the motor and propeller. The sealing surface material of the mechanical seal is silicon carbide. The design service life of mechanical seals is greater than 25000 hours. The design of mechanical seals can withstand both forward and reverse rotation without any adverse consequences.

Corrosion resistant anaerobic tank submersible mixerIt should be able to operate continuously under the following conditions:

1. Temperature not exceeding 40 ° C;

2. The pH value of the medium is between 5-9;

3. Liquid density not exceeding 1150kg/m3;

4. Long term diving operation, with a diving depth generally not exceeding 20m.