Electric high-speed submersible mixer price

Electric high-speed submersible mixerSuitable for aeration tanks and anaerobic tanks in industrial and urban sewage treatment plants, it can be used to create water flow during water circulation, nitrification, denitrification, and phosphorus removal stages. The mixed mixing series products use multi pole motors and adopt a direct connection structure, which has low energy consumption and high efficiency; The impeller is formed by precision casting or stamping, with high precision, large thrust, beautiful and smooth appearance, and compact structure.

Electric high-speed submersible mixerWorking Principle:
The stirring impeller rotates and stirs the liquid under the drive of the motor to generate a rotating jet. The shear stress along the jet surface is used for mixing, causing the liquid outside the flow field to generate stirring effect through friction. At the same time, a volumetric flow is formed during extreme mixing, and a large volume flow mode is applied to achieve controlled fluid transport.

Regular inspection and maintenance.

1. When the equipment is not used for a long time, it should be cleaned and lifted in a ventilated and dry place, paying attention to antifreeze and high temperature. If placed in water, run for at least 30 minutes every 15 days (cannot run without water) to check its functionality and adaptability.

2. The cable should be inspected at least once a year, and if it is damaged, it should be replaced.

3. Check the motor insulation and fastening screws at least once a year. If the motor insulation decreases.

4. The mixer has been injected with an appropriate amount of 32 # mechanical oil in the oil chamber before leaving the factory to lubricate the mechanical seal. This oil should be checked once a year. If water is found in the oil, it should be drained, the oil should be replaced, the sealing gasket should be replaced, and the screw plug should be tightened.

After three weeks, it is necessary to recheck. If the oil becomes an emulsion again, the mechanical seal should be inspected and replaced if necessary.

5. At least once a year, check the performance of the monitoring equipment, the chain block, and the lifting ring chain. If there is any damage, it should be repaired or replaced in a timely manner.

6. After a malfunction occurs in the operation of the industrial submersible mixer, please follow the provided troubleshooting methods to eliminate it. If the problem still cannot be solved and the cause cannot be determined, do not dismantle or repair it without authorization.