How much does the fully automatic tray pressure testing machine cost

The tray pressure and compression testing machine can perform bending tests, fork lift tests, stacking tests, and floor slab bending tests on 1.5m * 1.5m trays according to customer requirements. The equipment meets the testing requirements in GB/T4996, GB/T4995, ISO8611, as well as various parameter tests specified in the standards. The load test is displayed through force sensor measurement software, and the bending deflection test is performed through dial gauges placed at different positions. The deflection values of fork lift tests, stacking tests, and floor slab bending tests are replaced by the displacement of the pressure plate during walking.

Product Parameters:

1. Test force: 100kN

2. Test force measurement range: 1% - (1KN-100KN)

3. Accuracy of test force indication: better than ± 1% of indication

4. Test power resolution: 1/300000 (no grading throughout the entire process)

5. Measurement accuracy of beam displacement: resolution higher than 0.0025mm

6. Deformation measurement accuracy: ± 0.5% (within the range of 0.2-10mm)

7. Test speed range: 0.01-300mm/min, stepless speed regulation

8. Speed control accuracy: ± 1% (0.01~10mm/min); ±0.5%(10~300mm/min)

9. Constant force, constant deformation, constant displacement control range: 0.2%-

10. Constant force, constant deformation, constant displacement control accuracy: within ± 1.0% of the set value when the set value is less than 10% FS

When the set value is ≥ 10% FS, within ± 0.1% of the set value

11. Deformation rate control accuracy: within ± 2.0% of the set value when the rate is less than 0.05% FS

When the rate is ≥ 0.05% FS, it is within the set value of ± 0.5%

12. Test space: Compressed space: 800mm (excluding tooling and specimen space) C: Effective test width: 1650mm

13. Bare machine size: 2200 * 1500 * 2150mm

Auxiliary equipment configuration:

a. One set of 1500 * 1500mm upper pressure plate

b. One set of 1500 * 1500mm support disk

c. 4 loading bars of 50 * 10 * 1500mm

d. 4 loading bars of 50 * 50 * 750mm

e. 4 loading bars of 50 * 50 * 1500mm

f. Two 50 * 100 * 1500mm supports

g. Two 100 * 200 * 1500mm supports

h. Load 4 steel pipes with a diameter of 50 * 1500mm

i. 4 dial gauges

j. One 300 * 300mm pressure plate