How much does the fully automatic ring stiffness testing machine cost

The microcomputer controlled pipe ring stiffness testing machine adopts a dual space portal structure, with upper space tension and lower space compression and bending. Mainly used for testing the ring stiffness and deformation performance of various types of pipes.

According to the standard:

1. GB/T2611-2007 General Technical Requirements for Testing Machines

2. GB/T9647-2003 "Determination of Ring Stiffness of Thermoplastic Pipes"

3. GB/T18477-2001 "PVC-U Double Wall Corrugated Pipes for Underground Drainage"

4. GB/T21238-2007 "Glass Fiber Reinforced Plastic Sand Pipe"

5. GB/T18998.2-2003 "Chlorinated polyvinyl chloride (PVC-C) piping systems for industrial use - Part 2: Pipes"

6. CJ/T165-2002 "High Density Polyethylene (HDPE) Wrapped Structural Wall Pipe"

7. GB/T7314-2005 "Test Method for Room Temperature Compression of Metallic Materials"

8. GB/T14452-1993 "Test Method for Bending Mechanical Properties of Metallic Materials"

Technical Specifications:

1. Test force 50kN

Testing machine level 1.0

3 load measurement range 1%~

4. Relative error of indication ± 1%

5 Test force resolution 1/± 500000FS (with constant resolution throughout the entire process)

6 Deformation measurement range 0.2%~

7 force control speed adjustment range 0.005%~5% FS/S

When the rate control accuracy is less than 0.05% FS, it is within ± 1% of the set value;

When the rate is ≥ 0.05% FS, it is within ± 0.5% of the set value;

9. Deformation rate adjustment range 0.005-5% FS/s;

When the deformation rate control accuracy rate is less than 0.05% FS/s, it is within ± 1% of the set value;

When the speed is ≥ 0.05% FS/s, it is within ± 0.5% of the set value;

11. Displacement rate adjustment range: 0.01~500mm/min;

The displacement rate control accuracy is within ± 0.2% of the set value;

13 Constant force, constant deformation, constant displacement control range 0.5%~

When the set precision of 14 constant force, constant deformation, and constant displacement control is ≥ 10% FS, it is within ± 0.5% of the set value

When the set value is less than 10% FS, it is within ± 1% of the set value

Effective test width of 600mm (customizable)

16 effective compression space 0-1000mm (customizable)

17 Power supply voltage~220V ± 10% 50Hz (must be reliably grounded)

18 machine power 0.75KW

19 load rack size (LWH) approximately 1500 × 750 × 2525 (depending on customer testing space)

20machine weight≈1550kg