-
E-mail
1658000156@qq.com
-
Phone
13916256554
-
Address
Jiading District, Shanghai
Product Categories
Shanghai Hansi Electromechanical Co., Ltd
50KW gasoline generator (230/400V)
NegotiableUpdate on 01/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The function of the spark plug of a 50KW gasoline generator (230/400V) is to introduce the high-voltage electricity generated by the ignition system (mainly the magneto) into the combustion chamber and generate an electric spark, which timely delivers the compressed combustible mixture in the gas cylinder. The final function of the ignition system is now working on the spark plug. The ignition system requires spark plugs for small gasoline generators. Spark plugs come into direct contact with high-temperature and high-pressure gases during operation, and they themselves carry high voltage. Therefore, they must have mechanical strength that can withstand high temperature and high voltage, as well as good insulation performance that can withstand high voltage.
Product Details
50KW gasoline generator (230/400V)
The function of spark plugs in gasoline generators is to connect the ignition system(Mainly magnetic motors)The generated high voltage electricity is introduced into the combustion chamber and generates electric sparks, which timely compress the combustible mixture in the gas cylinder. The final function of the ignition system is now working on the spark plug. The ignition system requires spark plugs for small gasoline generators. Spark plugs come into direct contact with high-temperature and high-pressure gases during operation, and they themselves carry high voltage. Therefore, they must have mechanical strength that can withstand high temperature and high voltage, as well as good insulation performance that can withstand high voltage.
Installation steps and methods for gasoline generator engines. After the maintenance and repair of the gasoline generator set, the components must be cleaned before installation. Installation should be carried out in the order of from inside to outside, and then disassembled and installed first. The steps and methods are to install the piston pin of the gasoline generator engine. The piston and connecting rod are connected by piston pins. Place the piston with the hinged hole in lubricating oil and heat it up until80-100At ℃, clamp the piston out and quickly insert the piston pin into the pin hole and connecting rod small head shaft hole(Note that the circular surface of the connecting rod big end should be aligned with the anti expansion cut of the piston in the same direction)Gently insert with a topper.
| Parameters of HS50REG gasoline generator: | |
| Product Model | HS50REG/HS50REG-ATS |
| Rated peak power (GASOLINE) | 50KVA |
| Rated voltage (V) | 230/400 |
| Rated current (GASOLINE) | 99.5 |
| phase number | three-phase |
| Rated speed (rpm) | 3600 |
| power factor | 0.8 |
| Frequency (Hz) | 50 |
| Engine part number | Q7 |
| Displacement (cc) | 2600 |
| compression ratio | 9.5:1 |
| ignition system | ECM electronic ignition |
| electric start | yes |
| Starting motor specifications | QDY1205 12V 1.2KW |
| fuel type | GASOLINE/NG/LPG |
| Cylinder diameter x stroke (mm x mm) | L4-81×77 |
| breathing method | Naturally Aspirated |
| Engine oil capacity (L) | 3.5 |
| Rotary oil filter | yes |
| cylinder block | cast iron |
| cylinder liner | cast iron |
| Charging method | 14V/90A charging generator |
| Recommended Battery Cold Start Current (CCA) | 525A |
| cooling system | Closed liquid cooling |
| High temperature shutdown | yes |
| Low oil pressure shutdown | yes |
| Type of AC generator | Synchronous generator, rotating magnetic field |
| pressure regulating system | AVR automatic voltage regulation |
| Excitation type | brushless |
| polar number | 2 |
| Total harmonic distortion @ full load | ≤ 5% |
| insulation class | H |
| Stator winding material | copper |
| Material of rotor winding | copper |
| Laminated materials (cold-rolled or hot-rolled) | cold rolling |
| connection method | Direct coupling (disc type soft connection) |
| motor bearing | 6306RS |
| voltage stability | |
| type | electron |
| Sensing | Single-phase [three-phase] |
| pressure regulation | ± 1% |
| Governor parameters | |
| type | electron |
| Frequency regulation from no-load to full load | synchronization |
| Steady-state frequency regulation | ± 0.5% |
| Controller installation location | Inside the chassis, above the motor |
| Manufacturer/Part Number | Zhongzhi/HSC940 |
| Auto/Manual/Off | yes |
| Generator voltage detection | yes |
| Mains voltage detection | none |
| Low oil pressure shutdown | yes |
| Low frequency protection | yes |
| High frequency protection | yes |
| crew | |
| 24/7 chassis | Powder coating cold rolling |
| Protection level | IP 23 |
| Emergency stop switch | have |
| Fuel solenoid valve | Dual solenoid valve |
| Closed type muffler | yes |
| grounding system | Rack grounding |
| Type of sound insulation device | Metal plate+soundproof cotton |
| Noise output dB (A) at 23ft (7M) during low-speed operation of the generator | 65 |
| Under the normal operation of the generator at full speed, the noise output at 23ft (7M) is dB (A) | 73 |
| GASOLINE consumption 50% load gal/hr (L/hr) | |
| GASOLINE consumption 100% load gal/hr (L/hr) | 13.7L/hr |
| Unit size (length x width x height) in/mm | 61.4×35×38.19 / 1560×890×970 |
| Packaging dimensions (length x width x height) in/mm | 64.6×38.2×43.3 / 1640×970×1100 |
| Net weight (lbs/kg) | 475 |
| Gross weight (lbs/kg) | 520 |
| Loading capacity of 20/40 foot container | 12/28 |
| brand | HANSI HANSI |
| person in charge | Manager Cai |
50KW gasoline generator (230/400V)
