Which is a good vertical powder liquid mixer

JiangsuSGN's GLC2000Online chemical powder liquid mixerCan continuously mix liquids and solids (powders and small particles). Various substances are pre mixed in a certain proportion and then dispersed to directly obtain the finished product. Increasing the mixed solid flow rate can accelerate the processing speed and reduce the container volume, thus eliminating the need for additional expensive and bulky mixers. GLC2000 provides higher flexibility and stability to ensure product quality. The GLC2000 has a special design that does not require vacuum negative pressure to suck powder into the machine, thus avoiding air intervention. During the production process, GLC has great flexibility and also allows for higher material density.

GLC2000Online chemical powder liquid mixerWorking Principle:

Equipped with a specially designed rotor, with one inlet for liquid and one inlet for powder, the two phases can quickly disperse the powder upon instant contact. The machine can operate in a loop until all the powder is added, then seal the feeding inlet and continue to disperse and mix in the chamber. According to product requirements, the powder's properties can reach a concentration of 70%. In addition, if the viscosity is too high, a pump can also be added before the inlet

GLC2000 features:

1. Efficient inhalation system with high throughput

2. Simple and sturdy design

3. Automatically adjust the supply of solids and liquids

4. No need for additional batching equipment

5. Closed system to prevent dust and solvent emissions

6. Wetting particles to prevent the formation of clumps

7. Unpacking and unloading without losing raw materials

8. Greatly shortened production time

9. Reduce the addition of raw materials through more effective fragmentation of raw materials

10. Compact production method

11. Developed an easily upgradable process to use laboratory machine PLD for production machine PLD

12. The machine can automatically drain water and has CIP and SIP cleaning standards

All parts that come into contact with liquids are made of 316L or 316Ti stainless steel

14. Compliant with 3A hygiene and certification

GLC2000 Series Selection Table:

Note: By adding additional pumps and powder feeding systems, the feeding volume can be increased.