Which is a good portable 3-200 non methane total hydrocarbon analyzer

Non methane total hydrocarbon analyzer 3-200It is a portable heating type FID analyzer with reasonable design, compact structure, sturdy and durable, and economic efficiency. It has sold thousands of units so far and is widely used in various fields, including flue gas monitoring, especially in industrial integrated systems. In addition to its portability and compact structure, 3-200 has significant differences from VE7 and 3-300A.Non methane total hydrocarbon analyzer 3-200Originally designed to replace online FID analysis, the 3-200 has been tested in the market for 38 years and is a highly reliable, sturdy, and durable heating type total hydrocarbon analyzer. It is portable and can be installed on a 19 inch bracket or desktop. The instrument has low baseline drift, high accuracy, high sensitivity, and is stable and reliable.Non methane total hydrocarbon analyzer 3-200The FID detector is installed inside the high-temperature box to avoid the loss of heavy hydrocarbons. At the same time, it provides high reliability for the analysis of pollutants from ultra trace amounts to high concentrations, suitable for ambient air, high-purity gases, and other gases.

All components of the total hydrocarbon analyzer that come into contact with the sample are installed in a high-temperature chamber, including the sample filter, which is continuously heated. The filter can be cleaned by compressed air or nitrogen back blowing, and it does not affect the measurement during the blowing process. During blowback, the sample pipeline is also cleaned simultaneously. When detecting chimney gas emissions, there is no need to use sampling probe filters. Total hydrocarbon analyzer with built-in combustion air generator required for FID detector. No need for expensive zero gas generators or synthetic air cylinders.

Non methane total hydrocarbon analyzer 3-200Performance characteristics:

1. Made in Germany

2.1st Sampling Selection: Maintenance free sample filter blowback system, no need to disassemble and clean (automatic blowing optional)

3.2nd Sampling Selection: Removable sample filter that can be easily replaced from the back panel without the need for special tools.

4. All components in contact with the sample are installed inside a 190 ℃ box

5. Built in sample pump

6. Built in combustion air source, no need for external steel cylinders

7. Permanent 2um stainless steel filter or detachable 2um sample filter

8. Zero gas and calibration gas overload calibration system

9. Automatic shutdown alarm, optional gas shut-off valve

10. Fast response time less than 1 second

11. Low fuel consumption, high selectivity

12. microprocessor control, PID type temperature controller

13. Optional adjustment plate, place the heated sample line inside the heating box to eliminate condensation points. Cannot be used simultaneously with OVE32

14. Standard sample gas, zero gas, standard gas, and blowback gas remote control

15. Measurement range adjustment with automatic or remote control options

16. Monitor hydrocarbon emission sources according to EPA 25A