WAD-2 series radar level gauge

Product application:

The intelligent radar level gauge is suitable for external measurements of containers, storage tanks, and warehouses with complex process conditions, and is not affected by changes in the physical properties of the measured medium. It uses two-wire or four wire technology and is suitable for explosion-proof applications. The non-contact and continuous measurement pulse type level gauge can measure distances up to 70m.

Product Features：

The WAD-2 series high-frequency radar level gauge adopts an emissivity of 26GHZ, therefore it has the following characteristics:

1. Stable and high-precision measurement;

2. Non contact radar, no wear and tear, no pollution;

3. Wireless ruler size, easy to install, sturdy and durable, maintenance free;

4. Shorter wavelength, better reflection on tilted solid surfaces;

5. The measurement blind spot is smaller, and good results can also be achieved for measuring small cans;

6. Small beam angle, concentrated energy, enhanced echo capability for simultaneous propagation, and beneficial for avoiding interfering objects;

7. Almost free from corrosion and foam;

8. Almost unaffected by changes in water vapor, temperature, and pressure in the atmosphere;

9. Severe dust environment will not affect electromagnetic wave operation;

10. High signal-to-noise ratio, which can achieve better performance even in fluctuating situations;

11. High frequency is commonly used to measure solid and low dielectric materials.

Product Introduction:

WAD-2B Liquid Radar Level Gauge

Application: Storage containers or process containers, liquids with complex process conditions, such as storage tanks, process container liquids

Slurry.

Measurement range: 0-30 meters

Antenna Material: Stainless Steel 304/Stainless Steel 316

Process connection: thread, flange

Medium temperature: -40~250 ℃

Process pressure: -0.1~4.0mpa

Accuracy: ± 3mm

Protection level: IP67

Frequency range: 26GHz

Explosion proof rating: EXIA II CT6 Ga/Exd ia II T6 Gb

Signal output: 4~20mA/HART (two-wire/four wire) RS485/Mod bus