SAIL/C-H-R-T4 Intelligent Temperature Controller

Brief introduction

SAIL-C-H-R-T4 is an intelligent temperature controller developed by our company with excellent performance, strong EMC anti-interference ability, high strength, and exquisite appearance. It has been used in various power industries around the world for nearly 20 years, with stability, reliability, and low failure rate.

IItechnical specifications

Input signal analog quantity heat electricity I: Standard thermocouple──B、S、K、.E、J、T、WReclass

electricity Resistance:Standard thermistor - Pt10, Pt100, Cu50 and other remote pressure resistors

Current: 0-10mA, 4-20mA, 0-20mA, etc. - Input impedance ≤ 250W

Voltage: 0-5V, 1-5V, etc. - Input impedance ≥ 250kW

Measurement range -1999 to 9999 words

measurement accuracy 0.3％FS±1Words or0.5 ％FS±1 character

divide distinguish rate 1、0.1、0.01perhaps0.001character

temperature compensation -10 ～ 60 ℃

Display mode -1999 ～ 9999 Measurement value display LED working status display

control mode Positional formON / OFFBring back the difference

output signal analog output DC 0-10mA (load capacity ≤ 750)W）DC 4-20mA (load capacity ≤ 500)W)

DC 0-5V (output capacity ≤ 250)W）DC 1-5V (output capacity ≤ 250)W)

Switching Output Relay control output- RelayON/OFFBring back the difference.

Contact capacity:AC220V/3A；DC24V/6A(Resistive load)

Controllable silicon control output──SCR(Zero crossing trigger pulse of thyristor) output,

Triggering thyristor: 400V/100A

Solid state relay output──SSR(Solid state relay control signal) output,

6～24V/30mA(Voltage is not adjustable)

Communication output Interface methodStandard serial bidirectional communication interface:RS -485 , RS-232C , RS-422class

wave particular rate──300～9600bpsInternal free setting

Feed outputDC 24 V ,Load capacity≤30 mA

Alarm method selectable1-3 limit alarm,LEDinstructions. The alarm method is relayON/OFFBring back the difference (users can freely set it)

Alarm accuracy ±1character

Parameter setting ·Panel touch key numerical setting ·Parameter setting value password lock · Parameter setting value permanently saved after power failure

Protection method ·Input super/Under range alarm ·Automatic reset of power supply under voltage ·Automatic reset for abnormal work（Watch Dog）

·Input circuit disconnection alarm (when thermocouple or resistor input), relay output statusLEDindicate

Online communication The communication interface is a two-wire, three wire, or four wire system (such asRS-485、RS-232C、RS-422Etc.),

Baud rate300～9600bps

Usage environment ambient temperature 0～50℃

relative humidity ≤85%RH

Supply Voltage ordinary instrument for drawing circles type ·AC 220 V + 10 -15% ( 50 Hz±2 Hz )Linear power supply

particular different type ·AC85～260 V- Switching power supply ·DC 24 V±2 V- Switching power supply

work consume ·≤5W（AC220VLinear power supply)

·≤4W（AC85～260VSwitching power supply) ·≤4W（DC24VSwitching power supply)

tie construct Standard card in type

weight measure ·420 g ( AC 220 VLinear power supply) ·260 g (Switching power supply)