Selling rubber rollers, magnetic separators, and water rollers at a price

The various Yunfan brand magnetic separators provided by Yantai Yunfan Filtration System Company can separate various magnetic impurities in machine tool coolant.

The magnetic separator housing is equipped with a liquid guide plate that is concentric with the magnetic cylinder. The reliable design allows the magnetic chips in the separated liquid to be adsorbed onto the magnetic cylinder.

The reducer drives the magnetic cylinder to rotate through the sprocket, and then passes through the rolling of the rubber roller to squeeze out the liquid carried by impurities and flow back to the box without overflowing into the chip box, causing waste. Afterwards, the impurities are separated from the magnetic cylinder by the scraper plate and fall into the chip box. Conventional models are classified according to the corresponding water pump flow rate12Type,25Type,50Type,100Type,200Type,300Type,400Type,500Type, etc

When using the separator, the working flow rate should be set according to the nominal data, otherwise excessive flow rate will lead to a decrease in separation accuracy. Prevent the entry of non powdery chips during use,Especially steel shavings can accelerate the wear of rubber rollers and shorten their service life. The separated substances in the coolant cannot increase sharply, otherwise it will increase the adsorption height of impurities on the outer wall of the magnetic cylinder, making it impossible to pass through the rolling area between the rubber roller and the magnetic cylinder.

The pressure roller of the magnetic separator is the main vulnerable part of the rubber roller type magnetic separator during use. The main function of the pressure roller is to squeeze out the cutting fluid attached to the surface of the magnetic cylinder during the adsorption of iron chips, reduce the waste of cutting fluid, and make the separated abrasive chips dry and easy to handle. In working engineering, the pressure roller inevitably rubs against iron filings, grinding wheel dust, etc., and the oil in the cutting fluid also reacts with the rubber on the surface of the pressure roller. Therefore, the rubber layer on the surface of the pressure roller will gradually wear down, lose elasticity, and even crack. The rubber roller of the magnetic separator needs to be replaced or repaired after wear to ensure its performance.
We provide rubber rollers (rubber rollers, water rollers, rubber rollers) for magnetic separators, which can be customized according to customer sizes and can replace similar foreign products. It is generally believed that the thicker the rubber layer on the surface of the pressure roller, the greater its elasticity, and the more obvious the effect of squeezing water. The main configuration of the pressure roller includes a shaft, elastic retaining ring, bearing, rubber coating layer, thick walled steel pipe, connecting block, etc.

During use, the surface of rubber rollers may be embedded with hard chips or adhered with impurities, which can affect their performance. Therefore, regularly cleaning the rollers can extend their service life.

The rubber roller type magnetic separator currently provided by Yantai Yunfan Filtration System Company can be equipped with a scraper plate on the surface of the rubber roller according to the on-site situation. Adding a scraper plate at the position of the rubber pressure roller can timely remove the oil adhered to the surface of the pressure roller、Impurities such as abrasives can effectively prevent abrasives from adhering to the pressure roller, ensuring good squeezing effect of the pressure roller and increasing the friction force of the pressure roller to avoid slipping of the rubber roller. However, due to the wide magnetic cylinder of the large magnetic separator, the middle of the scraper plate is prone to warping, making it difficult to clean the impurities on the surface of the pressure roller.

When installing the separator, pay attention to adjusting the direction of the magnetic cylinder according to the marked arrow, and then adjust the butterfly nut moderately to make the water roll(rubber pressure roller)Maintain a compacted state with the magnetic cylinder.

Impurities cannot increase rapidly, otherwise it will overload the motor.Rubber roller magnetic separator with water pressure rollerThe surface attachments should be cleaned in a timely manner to prevent hard objects from embedding into the surface of the rubber roller.

Rubber roller magnetic separator with water pressure rollerCan be made according to requirements.