Quotation for manufacturing a constant temperature aging room

Product Name:Constant temperature aging room/aging room/burner room/high temperature aging room/aging test room

Product Model:Locationseries

Introduction to Constant Temperature Aging Room

constant temperatureAging rooms, also known as burn rooms, are designed for high-performance electronic products such as:planSimulate a high-temperature and harsh environment testing device for computer systems, displays, terminals, automotive electronic products, power supplies, motherboards, monitors, exchange chargers, etc., which is an important experimental equipment for improving product stability and reliability、Improving product quality andcompeteThe equipment is widely used in competitive and important production processesshouldUsed in fields such as power electronics, computers, communications, medical devices, etc.

Room structure: The aging room structure is generally assembled on site using insulation boards (EPS color steel plates or rock wool boards), and the room dimensions are designed according to customer requirements. rootConfigure the main system, main power system, control system, heating system, temperature control system, intake and exhaust system according to different requirementsplusThermal system, time control system, testing load, etc. can be detected through this testing program to identify defective products or parts. It provides effective means for customers to quickly identify and solve problems, fully improving customer production efficiency and product qualityAdditionally, observation windows can be set up as needed to facilitate outdoor observation of indoor product testing conditions. There are also sockets with different voltages on the wall to meet the needs of product aging testing.

Air duct system: Heating fans and air duct systems are usually installed on the aging roof without occupying other space. The general air duct system consists of a circulating air system and an overheated exhaust system. The indoor circulating air is heated by the heater and then sent back to the room by the supply fan through the insulation duct, and repeatedly circulated to maintain the room temperature within the set range. When the room temperature exceeds the alarm set value, the exhaust fan starts, extracts the overheated gas from the room, and at the same time, the outdoor cold air enters the room and mixes with the hot air to restore the room temperature to normal.

Control system: Two levels are used in the control system of the aging roomPIDAdjust the heating amount to achieve precise control of the room temperature, and the temperature controller can display real-time scrolling temperature at any six points in the room,Convenient for customers to accurately grasp the temperature inside the room. The control system is also equipped with various protection functions, including over temperature alarm protection, fan fault alarm protection, no wind alarm protection, indoor smoke induction alarm protection, etc. The complete protection functions ensure that the aging room can operate stably for a long time. (Optional PLC for control)

Indoor testing rack

Test racks are usually designed and manufactured according to customer products and requirements. Generally, the design of test racks requires a stable structure, easy operation, and meets functional requirements. Power cords, network cables, etc. are usually arranged on the testing rack for use during testing.

Features:

1． Accurate temperature control with high precision. Due to the use of a circulating air duct system design and electronic control system, the temperature uniformity of the entire room can be maintained, which is significantly higher than similar products.

2． The room has a wide temperature range and can be continuously adjusted. at room temperature~60℃ (room temperature)~85Within the temperature range of ℃, it can be set arbitrarily. If the customer has specific requirements, higher temperature products can be designed.

3． The system has complete protection functions, which can ensure safe and long-term stable operation.

4． Beautiful appearance, convenient construction, and short construction period.

purpose：extensiveshouldUsed in fields such as power electronics, computers, communications, biopharmaceuticals, etc.

Most of them belong to non-standard products and are installed on site according to customer requirements for size. For more information, please contact Fuyida Liang Sheng