Production of sliding wire collector for wire rope electric hoist

The CB341061/300 single-stage combined sliding contact wire collector has a safe ambient air temperature. The normal operating temperature of the sliding contact wire is -5 ℃~40 ℃. If it is used outdoors, the normal operating temperature is -25 ℃~40 ℃, and the uniform temperature difference within 24 hours cannot exceed 35 ℃. Otherwise, the safety sliding contact wire will definitely present some problems.

The altitude of the location where the safety sliding contact line is used cannot exceed 2km, because if the altitude exceeds 2km, the effect of air cooling and the influence of dielectric strength must be considered when using the safety sliding contact line, which will definitely affect some of the application effects of the safety sliding contact line. So in order to avoid these problems, try not to choose places with an altitude higher than 2km when using it.

In fact, the safety sliding contact line is a transmission device that can be applied to many high-temperature and harsh environments, whether it is a low-voltage or high-voltage type, it can achieve this advantage. However, despite this, it is also necessary to pay attention to the temperature and altitude of the surrounding air when using it, otherwise the advantage of reliable operation and no power outage accidents may not be so obvious.

CB341061/300 single-stage combined sliding contact wire collector is a new type of power supply system for feeding mobile mechanical equipment. The conductor is a special formula high-quality aluminum alloy profile, and the outer sheath is made of special polyvinyl chloride material, which plays a safety role in rain, dust, snow, and electric shock prevention. Simple in structure and easy to install and maintain, it is widely used as a power supply line for mobile equipment in mining, metallurgy, chemical industry, machinery, docks, freight yards, and other fields.

The working principle of a single beam crane is relatively simple, and its operation process is usually divided into three steps: start, run, and stop. Firstly, the operator needs to turn on the electrical control system and then start the crane through the control cabinet or remote control. After starting, the large and small vehicles will begin to move to suspend the cargo. The winch will simultaneously lift and lower the cargo until the lifted object reaches the target position. After the goods arrive at the target location, the operator needs to stop the crane through the control cabinet or remote control, and then unload the goods.