Production of domestic wear-resistant testing machine

The linear wear tester is designed to test curved or flat surfaces and is a tool for evaluating the wear resistance of various sizes. The arm end is connected to a precision roller spline shaft, and the testing accessory is installed at the bottom of the spline shaft, with a weight support installed at the top to adapt to different applied loads. When the horizontal arm performs reciprocating linear motion, the testing system will move up and down along the contour of the specimen with the testing attachment. In order to enhance the versatility of the instrument, the linear wear testing machine can be equipped with optional testing accessories to evaluate the ability of the material surface to resist relative wear, abrasion, scratch, abrasion, friction fading, and other damages. The linear wear testing machine can be used for wet and dry testing.

Taber5770 Wear Testing Machine from the United States

The standard configuration of linear wear tester includes:
Wearaser clamp kit, stainless steel
250g auxiliary counterweight plate (x3)
CS-10 and H-18 friction heads
Wearaser depth gauge
S-14 repair sandpaper
S-12 brush

·LCD operation touch screen interface with optional display options
·11 adjustable standard strokes, ranging from 0.2 to 4.0 inches in stroke speed
·0.2 ', 0.5', 0.61 ', 0.75', 1.0 ', 1.5', 2.0 ', 2.5', 3.0 ', 3.5' and 4.0 '
·Special movement distance can be customized

·Adjustable from 2 to 75 times per minute
·Available in weights ranging from 350 to 2400 grams
·Laser alignment guidance device for precise placement of samples
·Display test cycle or stroke
·The safety switch stops testing when the lid is opened
·Dimensions: 554x345x508mm

Taber5770 Wear Testing Machine from the United States