Measure the manufacturer of the retractable protective cover

Customized retractable stainless steel plate protective coverIt is a traditional form of protection for machine tools. Steel telescopic guide rail protective covers are widely used in this field, playing an effective protective role in preventing chips and other sharp objects from entering. Through certain structural measures and suitable scraper plates, the infiltration of coolant can also be effectively reduced. Our factory's steel telescopic guide rail protective cover can meet the constantly improving requirements of modern machine tools in terms of high technology, correct installation position, and high operating speed.
The steel telescopic guide rail protective cover is made of high-quality 2-3mm thick steel plate cold pressed, and can also be made of stainless steel according to requirements. Special surface polishing will increase its value. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) for all types of machine tools.

The protective cover structure we have developed varies depending on the operating speed and guide rail. We are equipped with polyurethane or brass sliders for speeds below 10m/min. We are equipped with rollers for speeds below 30m/min. In addition, a buffer system is required between the drive board, scraper board, and suction board. The purpose of the slider buffer system is to reduce collisions, noise, and friction.

Customized retractable stainless steel plate protective coverThe number of sections is important for its proportion, weight, and operational characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of maximum stretch to minimum compression should be between 3:1 and 5:1.
Advantages of steel plate protective cover device:

1. Each piece of the protective cover can be operated simultaneously, which is different from the typical one piece pull type of protective cover, resulting in extremely low noise.

2. The use of a protective cover for the device can increase its service life.

3. The steel plate protective cover device can increase the movement speed of the cover to 120m/min and withstand higher G values (2G).

4. The steel plate protective cover device ensures that the cover moves in the same direction and is parallel (avoiding the disadvantage of snake movement in general shear type protective covers).

5. It can be smoother at high speeds without any vibration.