Customized guide rail protective cover manufacturer

NegotiableUpdate on 05/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Each piece of customized machine tool guide rail protective cover can be started and moved simultaneously, which is different from the general shield that is pulled one piece after another, so the noise is extremely low. The use of a protective cover for the device can increase its service life. The steel plate protective cover device can increase the movement speed of the cover to 120m/min and withstand higher G values (2G).

Product Details

Customized machine tool guide rail protective coverThe number of sections is important for its proportion, weight, and operational characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of maximum stretch to minimum compression should be between 3:1 and 5:1.
Advantages of steel plate protective cover device:

1. Each piece of the protective cover can be operated simultaneously, which is different from the typical one piece pull type of protective cover, resulting in extremely low noise.

2. The use of a protective cover for the device can increase its service life.

3. The steel plate protective cover device can increase the movement speed of the cover to 120m/min and withstand higher G values (2G).

4. The steel plate protective cover device ensures that the cover moves in the same direction and is parallel (avoiding the disadvantage of snake movement in general shear type protective covers).

5. It can be smoother at high speeds without any vibration.

Customized machine tool guide rail protective coverimage: