Manufacturing materials for walk-in aging rooms

A walk-in aging room, also known as a burn-in room, is designed for high-performance electronic products such as:planSimulating a high-temperature and harsh environment testing device for computer systems, displays, terminals, automotive electronic products, power supplies, motherboards, exchange chargers, etc. is an important experimental equipment for improving product stability and reliability、Improving product quality andcompeteThe equipment is widely used in competitive and important production processesshouldUsed in fields such as power electronics, computers, communications, biopharmaceuticals, etc.

High temperature aging room structure: The aging room structure is generally assembled on site using insulation boards (EPS color steel plates or rock wool boards), and the room dimensions are designed according to customer requirements. rootConfigure the main system, main power system, control system, heating system, temperature control system, intake and exhaust system according to different requirementsplusThermal system, time control system, testing load, etc. can be detected through this testing program to identify defective products or parts. It provides effective means for customers to quickly identify and solve problems, fully improving customer production efficiency and product qualityAdditionally, observation windows can be set up as needed to facilitate outdoor observation of indoor product testing conditions. There are also sockets with different voltages on the wall to meet the needs of product aging testing.

Air duct system: Heating fans and air duct systems are usually installed on the aging roof without occupying other space. The general air duct system consists of a circulating air system and an overheated exhaust system. The indoor circulating air is heated by the heater and then sent back to the room by the supply fan through the insulation duct, and repeatedly circulated to maintain the room temperature within the set range. When the room temperature exceeds the alarm set value, the exhaust fan starts, extracts the overheated gas from the room, and at the same time, the outdoor cold air enters the room and mixes with the hot air to restore the room temperature to normal.

Control system: The control system of the high-temperature aging room adopts a two-stage PID to adjust the heating amount, achieving accurate control of the room temperature. At the same time, the temperature controller can display the temperature of any six points in the room in real-time, making it convenient for customers to accurately grasp the temperature situation in the room. The control system is also equipped with various protection functions, including over temperature alarm protection, fan fault alarm protection, no wind alarm protection, indoor smoke induction alarm protection, etc. The complete protection functions ensure that the aging room can operate stably for a long time. (Optional PLC for control)

Aging room testing frame

Test racks are usually designed and manufactured according to customer products and requirements. Generally, the design of test racks requires a stable structure, easy operation, and meets functional requirements. Power cords, network cables, etc. are usually arranged on the testing rack for use during testing.

The characteristics of a walk-in aging room:

1Accurate temperature control with high precision. Due to the adoption of *'s air duct system design and electrical control system, the temperature uniformity of the entire room can be maintained, which is significantly higher than similar products.

2The room has a wide temperature range and can be continuously adjusted. It can be set freely within the range of room temperature~60 ℃ (room temperature~85 ℃). If the customer has specific requirements, higher temperature products can be designed.

3The system has complete protection functions, which can ensure safe and long-term stable operation.

4Beautiful appearance, convenient construction, and short construction period.

high temperatureAging Chamberpurpose：extensiveshouldUsed in fields such as power electronics, computers, communications, biopharmaceuticals, etc.

The main technical parameters and characteristics of the aging room ORT-88 are as follows:

1. Temperature range: RT+5~70 degrees

2. Temperature fluctuation; +/-0.5 degrees

3. Temperature deviation:+/-3.0 degrees

4. Size of aging room: D8000 * W5000 * H2200mm

5. Internal volume: approximately 88 cubic meters

6. Temperature measurement: PT100 platinum resistor

7. Control system: digital temperature controller, PID regulation, SSR control heating output.

8. Warehouse system: Double sided color steel rock wool insulation sandwich panel

9. Air duct system: The air duct system is installed on both sides of the aging room. Adopting the method of sending air downwards and returning air upwards; The fan adopts a low-noise and low-power high-temperature resistant axial flow fan for forced air operation.