How much does the sales standard constant temperature and humidity curing box cost

1、 Product Overview:

1、 Product Introduction:

Standard constant temperature and humidity curing box, concrete test block curing test boxIt is designed and manufactured based on the national GB1345-77, GB/T17671-1999 "Method for Testing the Strength of Cement Mortar", and technical data provided by the National Building Materials Research Institute and relevant departments. It is suitable for various large, medium, and small cement plants, construction and engineering departments, and is used for setting and curing concrete specimens and cement specimens.

On the basis of the original maintenance box, this equipment has undergone a series of improvements in its overall design by incorporating the main surface. The box door is sealed with magnetic tape, and a refrigeration and humidification device is added inside, which has a series of advantages such as beautiful appearance and high temperature control accuracy. A user's own troubleshooting and maintenance table has been added to the user manual as a record provided by the user to the factory during maintenance, so that our factory can further make the product durable in the production process and achieve the user's ideal use purpose.

IIStandard constant temperature and humidity curing box, concrete test block curing test boxMain technical indicators:

1. Control humidity: RH95% or above

2. Control accuracy: 20 ℃± 1 ℃

3. Power supply voltage:~220V 50HZ

4. Heating power: 1000W

5. Cooling power: 165W

6. Fluorine dosage: R12120g

3、 Working principle:

1. Temperature and humidity control, controlled by instruments for temperature, humidity, and the entire process of heating, humidification, and cooling

2. The control of the working face is powered on by 220V. Turn on the power switch and the working indicator lights up. The instrument is turned on at the same time, and then adjust the temperature and humidity required for work. At the same time, the machine can automatically control timed humidification without manual management

3. Instrument key function: adjust the temperature setting key to 20 ℃. When the ambient temperature is higher than 22 ℃, turn on the cooling switch and turn it up. Turn off the heating switch to turn off the heating device. When the ambient temperature is lower than 20 ℃, turn the heating switch up to switch between cooling and humidification. Turn the humidification switch up to start the ultrasonic humidification device, completing the controlled temperature instrument's automatic control of humidification or constant temperature. When the temperature and humidity inside the box reach RH95% or above, the humidifier stops. When the humidity is insufficient, it automatically works

4、 Instructions for use (please read the manual carefully when using):

1. After filling the heating water tank, remove the humidifier water tank, unscrew the water sealing cover under the water tank, add water to 2/3, and reset the water tank and humidifier pipe. (When in use, only the waterproof box without water burns the humidifier)

2. Adjust the temperature and humidity to the desired level, and turn on the power switch of the instrument

3. After normal operation, install the test piece for maintenance

4. When draining water, open the drain pipe (valve) inside the box to release the water in the maintenance box, in order to extend the service life of the maintenance box