How much does it cost to sell FESTO valves

FESTO valve VSVA series offers low discounts
Festo cylinder FESTO solenoid valve Festo trachea Festo vacuum suction cup Festo filter Festo oil mist sensor FESTO agent
Please consult Shanghai Maoshuo Machinery Equipment Co., Ltd. for a large amount of stock of the entire series of products

German Festo FESTO pressure reducing valves can be divided into diaphragm type, spring diaphragm type, piston type, lever type, and bellows type according to their structural forms; According to the number of valve seats, it can be divided into single seat and double seat types; According to the position of the valve disc, it can be divided into positive action type and reverse action type. When the output pressure or diameter of the pilot operated pressure reducing valve is high, using a pressure regulating spring to directly regulate the pressure will inevitably result in excessive spring stiffness. When the flow rate changes, the output pressure fluctuates greatly, and the structural size of the valve will also increase. To overcome these drawbacks, a pilot operated pressure reducing valve can be used. The working principle of a pilot operated pressure reducing valve is basically the same as that of a direct acting valve. The pressure regulating gas used for pilot operated pressure reducing valves is supplied by small direct acting pressure reducing valves. If a small direct acting pressure reducing valve is installed inside the valve body, it is called an internal pilot operated pressure reducing valve; If a small direct acting pressure reducing valve is installed outside the main valve body, it is called an external pilot operated pressure reducing valve.

FESTO filter pressure reducing valve generates an upward thrust when the output pressure enters the feedback chamber through the feedback hole. Compared with the pressure of the given spring, when the equilibrium state is reached, the output pressure can be stabilized. After inputting compressed air of 0.3-1.0MPa, it enters the filtering chamber:
(A) Perform water, oil, and dust removal treatment. Due to the elastic force of the given spring pushing the ball valve open, air pressure flows into the output pipeline through the ball valve and enters the feedback chamber through a small hole;
(B) At this point, the force exerted by the air pressure on the diaphragm reaches equilibrium with the given spring force. However, due to external interference, the output pressure may be high or low compared to the given value. If the output pressure is lower than the given value, the force on the diaphragm and the given spring force will lose balance, and the diaphragm will shift downwards, causing the ball valve to open for air pressure compensation. If the output pressure is higher than the given value, the diaphragm will move upwards. At this time, the valve stem and diaphragm core will separate, and the air pressure will be discharged from the small hole to the atmosphere until a new equilibrium is reached. Therefore, the output pressure can always be set at the desired given value.

FESTO valve VSVA series offers low discounts
Festo cylinder FESTO solenoid valve Festo trachea Festo vacuum suction cup Festo filter Festo oil mist sensor FESTO agent
Please consult Shanghai Maoshuo Machinery Equipment Co., Ltd. for a large amount of stock of the entire series of products

Product function:

Combine the filter, pressure reducing valve, and oil mist device into one unit

High flow rate, efficient removal of pollutants

The composition of the air source processor includes an air filter, a pressure reducing valve, and an oil mist device. Some brands of solenoid valves and cylinders can achieve oil-free lubrication (relying on grease to achieve lubrication function), so there is no need to use oil mist

Tool! The filtration degree is generally 50-75 μ m, and the pressure regulation range is 0.5-10Mpa. If the filtration accuracy is required, it should be 5-10 μ m, 10-20 μ m, 25-40 μ m, and the pressure regulation should be 0.05-0.3Mpa, 0.05-1Mpa

The component composed of three major components connected without pipes is called a triple piece. The three major components are the air source devices in most pneumatic systems, installed near the gas equipment, and are the final guarantee of compressed air quality. The three major components

The installation sequence includes the air filter, pressure reducing valve, and oil mist device according to the intake direction. The combination of an air filter and a pressure reducing valve can be called a pneumatic two-piece component