Fully automatic softened water for bathing, manufacturer's straight hair

Hotel and restaurant resin exchange fully automatic softened water equipment Hotel and restaurant resin exchange fully automatic softened water equipment

1、 The reason for slow salt absorption in fully automatic softened water:

Low water supply pressure;

Serious blockage caused by sediment and other debris in the upper and lower layers of water;

Poor wastewater discharge caused by deformation, bending, etc. of the wastewater hose;

There are too many impurities in the resin layer;

There are leakage points on the salt suction pipeline, causing air to be sucked in;

There are foreign objects in the jet injector;

Air check valve malfunction, premature closure or blockage;

The selection of jet injector is too small.

2、 The softening process of fully automatic softened water:

The purpose of sodium ion exchange is to remove calcium and magnesium from water, turning hard water into soft water.A water softener generally consists of: operation, backwashing, and salt absorption+It consists of five workstations: slow washing, salt box replenishment, and positive washing

1. Operation: Raw water enters the resin tank and first comes into contact with the upper layer of exchange agent. When the upper layer of exchange agent fails, the incoming raw water undergoes ion exchange with the next layer of exchange agent, causing the working layer to continuously move downwards. When the failure layer reaches the protective layer, the equipment needs to perform resin regeneration

2. Backwash: When water cleans the resin layer from bottom to top, causing it to expand and loosen, while removing suspended solids and broken resin impurities from the upper part of the resin layer

3. Salt absorption: Flow a certain concentration of regeneration solution through the failed resin layer at a certain flow rate to restore its ion exchange capacity. According to the different flow directions of the regeneration solution, it is divided into co current regeneration and counter current regeneration.

4. Permutation: Permutation is a continuation step of regeneration. After the salt is stopped from entering the exchanger, continue to inject water at the same flow direction as during regeneration and at a similar flow rate, so that the regeneration liquid in the exchanger is discharged while further regenerating the resin.

5. Salt tank replenishment: After the salt water is fully absorbed, replenish the salt tank with the required amount of water for regeneration

6. Positive washing: After the replacement process is completed, the inlet water is used to clean the ion exchange resin layer according to the flow direction during operation, washing away the regenerated waste liquid and the ions that need to be removed until the effluent is qualified.

Shijiazhuang Chengke Environmental Protection Equipment Manufacturing Co., Ltd. was established in2015Year, is a new force in the domestic water treatment industry. Through several years of development, the company has gradually expanded into several major areas such as sterilization and filtration, softening and scale inhibition, circulating filtration, purified water, and pool water treatment. It has also enriched its product line with ultraviolet disinfectors, water tank self-cleaning devices, fully automatic softened water, strong magnetic descaling devices, bag filters, silicon phosphorus crystal tanks, etc., ensuring that we provide customers with complete services, including product selection, supporting equipment, and after-sales service. Think about what customers think and what they can do, seize today, and create better.