Efficient sugar beet/potato seedling planter

This sugar beet and potato seedling killing machine can be used in conjunction with a 40-120 horsepower four-wheel tractor, and has the characteristics of compact structure, good maneuverability, reasonable layout, stable operation, strong applicability, and simple maintenance.

Can complete the cleaning of sugar beet seedlings in one go! Working principle of this machine: Special blades, running at high speed, generate negative pressure, suck up the seedlings at the bottom of the ridge, and the high-speed blades crush them.

Product Introduction:

The tractor pulls the potato seedling killing machine forward in the direction of the potato ridge. The tractor transmits power to the gearbox through the universal joint transmission shaft, and then transmits it to the belt pulleys on both sides of the gearbox through the transmission shafts. The belt then transmits it to the seedling killing shaft, which drives the seedling killing knife to cut the seedlings and weeds. The guide baffle divides the seedlings and weeds into the ridges and ditches on both sides.

The seedling killing machine is based on the straw returning machine, which replaces the pressing wheel with a walking wheel and slightly changes the arrangement of the blades to make it more suitable for seedling killing before potato harvesting!

2 Main technical parameters:

Structural weight: 150-1000 kilograms
Supporting power: 40-120 horsepower
Working width: 600-3000mm
Number of working lines: 2-6 lines
Drum speed: 2000r/min
Production efficiency: 5-20 acres per hour
Main advantage: It can also suck up and crush the fallen seedlings in the furrow.
Technical maintenance and storage of 3 harvesters
1. After each shift, the soil in all parts of the equipment should be removed
2. Check the fasteners of each part and tighten them promptly if they are loose
3. Check whether each rotating part rotates flexibly. If it is abnormal, it should be adjusted and eliminated in a timely manner

The fallen seedlings and straw in the ditch can also be crushed, and when harvesting potatoes, they will not be harmed. One machine can replace 40 laborers.

4 Technical Maintenance and Storage
1. After each shift, the soil in all parts of the equipment should be removed
2. Check the fasteners of each part and tighten them promptly if they are loose
3. Check whether each rotating part rotates flexibly. If it is abnormal, it should be adjusted and eliminated in a timely manner
4. When not in use for a long time, the equipment should be protected from rain and avoid contact with acidic substances to prevent corrosion. The blade should be treated with oil!
Note: The above equipment does not include power and shipping costs!