B605 series immersion type liquid level transmitter

product overview

B605 is an input type static pressure measuring instrument. This instrument adopts micro machining technology and small stainless steel molds

The diffusion silicon pressure sensor with laser fine-tuning temperature compensation is used as the sensitive element, and a dedicated small signal conversion integrated circuit is used

Precision electronic circuits with core output4～20mADCStandard signal.

This product is widely used in dams, hydropower stations, high-rise water tanks, cooling towers, sewage treatment tanks, pump stations, water plants, and water treatment facilities

Fields such as geology, petrochemicals, and river monitoring.

Product Features

1 Anti condensation function

The pressure filter adopts a polymer filter screen and advanced process technology to prevent condensation.

2 No need for on-site calibration

B605The product has been calibrated before leaving the factory, and only on-site personnel need to install and use it correctly.

3 high-precision High stability

4 Small size and sturdy structure

5Easy to install and use

TECHNICAL INDEX

1Basic indicators

l range: 0～1m, 0～2m, 0～3m, 0～5m, 0～10m, 0～20m,0～1000m

l accuracy: 0.25%

l Usage temperature: -20℃～+80℃

l temperature coefficient:Zero point and full range:±1%/50℃/F

l Output: 4-20mADC two-wire system RS485 four wire system

l Power supply: 13-35VDC, intrinsic safety type is 24VDC

l Overload capacity: 2 times full range

2. Exterior Structure and Materials

l Probe material: 1Cr18Ni9Ti

l Sensor module: 316L

l Cable size: Ø 8.5 air conducting cable

l Protection level: probe IP68, junction box IP65

l Dimensions: Ø 32.8X150

3. Media conditions for use

l Compatible with 316L, 1Cr18Ni9Ti, nitrile rubber, and fluororubber liquids.

4. Installation method

l Below the liquid level

Natural sagging without the need for positioning or the use of counterweights

Three point positioning bracket

Pressure positioning hole

User provided insertion of steel pipe

l Above the liquid level

Tear off the adhesive tape on the back of the wiring board before use. The junction box can be hung and fixed, and the wiring should be done at the Hesman connector.

5. Explosion proof grade: intrinsic safety type IB Ⅱ CT