-
E-mail
wlshengde@126.com
-
Phone
13906569852
-
Address
No. 90 Shanhuangzekan Road, Chengdong Street, Wenling City, Zhejiang Province
Product Categories
Wenling Shengde Machinery Factory
Automatic multifunctional rice cake slicer
NegotiableUpdate on 05/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Automatic multifunctional rice cake slicer: A new rice cake slicer has been developed. This product can cut rice cake into thin strips at once, and the slicing efficiency is high. It can cut 150 pounds of rice cake per hour.
Product Details
Automatic multifunctional rice cake slicerinstallation and debugging
1. The device should be installed on a level ground.
2. During installation, attention should be paid to the verticality between the main body and the horizontal.
3. After installation, check whether the bolts in each part are loose or tightened. If so, please tighten them.
4. Configure the power cord according to the power of the device.
5. After the inspection is completed and the no-load test run is normal, production can proceed.
6. If there is any impact sound during operation, stop immediately for inspection and eliminate it.
Automatic multifunctional rice cake slicermaintenance
The maintenance and upkeep of machines is an extremely important and regular task that should be actively operated and closely coordinated with inspections to improve the efficiency of machine use.
1. Bearings bear all the load of the machine, so good lubrication has a great impact on the service life of bearings, which directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil must be clean and the seal must be good. The main oil injection points of this machine include 1 rotating bearing, 2 rolling mill bearings, 3 all gears, 4 movable bearings, sliding surfaces, and inside the gearbox to ensure no oil leakage.
2. The various parts of the newly installed machine are prone to looseness and must be checked regularly
3. Pay attention to whether the various parts of the machine are working properly
4. Pay attention to checking the degree of wear of easily worn parts and replace worn parts at any time
