When dealing with straw in the field, sometimes there may be malfunctions in the baler, and it is unclear where the problem occurred and how to handle it. The only solution is to wait for the manufacturer to arrange technical personnel to inspect, which wastes time and sometimes causes minor issues, as well as manpower. To avoid such problems, the editor has listed the possible problems and solutions of the baler. Come and take a look!
Possible reasons why straw cannot be picked up cleanly:
1. Pickup setting error (too high off the ground)
2. Driving speed too fast
3. Broken or worn teeth
handle:
1. Adjust the height of the pickup above the ground
2. Reduce driving speed
3. Replace with a new spring tooth
The reason for the irregular shape of the hay bundle
1. Uneven grass strips or uneven feeding speed of forks
2. The feeding amount is too large
3. The height on both sides of the density adjustment handle is inconsistent
handle:
1. Adjust the homework speed and power output shaft speed to make the feeding amount uniform and consistent
2. Reduce homework speed
3. Adjust the height of the two handles to be consistent
Reasons for inconsistent length of bales
1. The clutch claw of the bundling mechanism does not rotate flexibly
2. The surface engraving of the measuring wheel axle small gear is polished
3. The spring of the knotter actuator arm is loose or damaged from the hanging point
4. The locking nut of the measuring wheel axle is loose
handle:
1. Cleaning and lubricating clutch claws
2. Replace the small gear and check if the teeth engraved on the knotter actuator arm mesh properly with the teeth on the small gear
3. Check the spring
4. Re tighten the nut
Possible reasons for abnormal noise from picking up structures:
1. Elastic tooth deformation
2. Drum rupture
3. Wrapped with hay or hemp thread
4. The rolling bearing of the connecting arm is broken
5. The grass ring is deformed or broken.
handle:
1. Correct or replace the spring teeth
2. Replace the drum
3. Remove the wrapped object
4. Replace the crank arm rolling bearing
5. Replace the grass divider ring
The above are some common problems with balers. We hope to learn more about balers and help those who can