Which is the best BS-450SA horizontal band saw machine

Horizontal band saw machineProduct Introduction

oil pressureHorizontal band saw machineHigh quality design - the combination of craftsmanship and imagination, bringing customers a practical effect
1. Automatic cutting with feeding mechanism and clamping action provides precise cutting cycle.
2. A good saw belt tension and guidance system to maintain stable linear movement of the saw belt.
3. Regardless of the cross-section of the workpiece, hydraulic control can maintain stable cutting feed.
4. The device of quick contact rod can quickly lower the saw belt to the cutting position.
5. The entire cutting process is suitable for using an upper pressure device, which can be paired with a front clamp to avoid cutting vibration.
6. Multiple cutting sections with different lengths up to 9 types can be set.

Horizontal band saw machineProduct Features

Safety Design - Each band saw machine of Magnesium Jia Machinery has the following characteristics:
Safety and thermal overload switch
Saw belt and saw wheel safety protection cover
After cutting, the saw belt automatically stops
Low voltage and zero voltage control
Saw belt breakage detection

Accurate cutting length setting:
A sizing code table that is easy to read up to 0.1 mm or 0.01 inch decimal point, allowing for precise setting of the required cutting length.
Automatic lifting and rapid approach of saw belt:
The quick touch rod mechanism can detect the size of the workpiece, allowing the saw belt to quickly descend and detach, saving a lot of time.
The entire cutting device:
The entire cutting device is composed of an upper pressing system and clamps, which can achieve precise cutting for stacked sheet metal, round bars or pipe fittings.
Passive wheel rotation detector:
This device can detect saw belt overload and breakage, and can automatically shut down.
Three point clamping of hydraulic actuator clamp:
The workpiece is clamped on both sides of the saw belt, and the operator can provide manual and automatic clamping modes through a simple button; This clamp clamping method allows for automatic cutting.
Independent feeding clamp:
The feeding bed seat is operated by clamps, which is different from the traditional mode of one fixed and one movable; It has a good clamping and feeding effect on warped materials, and can achieve the goal of precise cutting.