-
E-mail
2850187703@qq.com
-
Phone
18319055480
-
Address
B3, 4th Floor, Jiale Building, No. 47 Zhenhua Road, Futian District, Shenzhen, Guangdong Province
Product Categories
Shenzhen Pengjin Technology Co., Ltd
Which is a good oil absorption tester
NegotiableUpdate on 01/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
S500 Oil Absorption Tester - Carbon Black Negative Lithium Battery Powder Test ASAHI is an instrument that provides liquid and measures torque changes when mixing powders. As the structure of the powder varies, its torque diagram also differs. The measurement data and torque curve graph will be automatically displayed and output to the printer and serial port.
Product Details
ASAHI S500 Carbon Black Oil Absorption Tester - Negative Lithium Battery Powder Testing
Brand: ASAHI
Model: S500
Name: Oil Absorption Tester
What is oil absorption value?
The oil absorption value is obtained by slowly adding DBP (dibutyl phthalate) or various other liquids such as DOP and linseed oil to powder samples such as carbon black, pigments, and battery materials. The oil absorption value refers to the amount of oil consumed when stirring from a dispersed powder state into a ball while adding and stirring.
The function of oil absorption value:
It can reflect the compactness, surface morphology, particle size distribution, etc. of the powder structure. The finer the particles of the powder, the larger the surface area, the narrower the distribution, and the higher the oil absorption value.
Different types of carbon black have different oil absorption values. Generally speaking, the more complex the structure of carbon black, the higher the oil absorption value.
1、 Product principle:
Gradually add liquid reagents to a certain sample, stir thoroughly to form a cluster without excessive reagent leaching, and calculate the oil absorption of the sample to increase the mass of the reagents2、 Product Introduction:This product is a device for mechanically measuring the absorbed dose of powder samples such as carbon black, pigments, and battery materials.In the measurement, the powder sample is placed in the mixing chamber and a certain amount of oil droplets are dropped on the sample when two motor-driven rotating wings are simultaneously stirred. By detecting viscosity changes in torque
(JIS K 6217-4:2008 Oil absorption value and pressure sample oil absorption value), to calculate the absorbed dose (ml/100g)
*Refer to JIS K6217-4:2008 or ISO4656 for oil absorption values and pressure sample oil absorption valuesThe measurement data is printed out, including the absorbed dose, torque variation curve, and temperature stirred in the area.
3、 Features of S500 Oil Absorption Tester:
Mechanical measurement
Mechanical measurement will not cause differences in data due to different workers' measurements.
Mixing chamber auxiliary temperature control function
More stable data measurement has been achieved through temperature control assisted in the mixing chamber
More compact
By measuring the area, printer, pump unit, and electrical equipment, achieve compact product functionality.
Different powder measurements
The measurement of absorbed dose can be done not only with carbon black, but also with low torque powders such as pigments, battery materials, and alumina
Various liquids can also be used
In addition to DBP (dibutyl phthalate) of carbon black, various liquids such as DOP and linseed oil can be used
Built in printing for convenient data management
The measured data can be printed out from the built-in printer, enabling real-time inspection of the measurement results. The external communication function can also enable data transmission to the PC
Using a touch screen
Adopting a touch panel display screen for intuitive operation.
safety design
In addition to the emergency stop switch in front of the equipment, the interlock function can also be activated with or without the presence of the mixing chamber and lid.
Oil can also be supplied from a remote location
Oil can also be supplied from a remote location. The 'buffer tank unit (optional)' can also be used to feed oil from a remote location.
4、 S500 Oil Absorption Tester Technical Parameters:
power supply |
AC100V±5% 50/60Hz (Shared) |
||||
display screen |
5.7 inches (320 * 240 dots) |
||||
Oil inlet pump |
High precision micro metering pump |
||||
Drip rate |
Change range: 1~8ml/min |
||||
precision |
Within 5% of full range (varying with wear of the rotating wing) |
||||
Rotation frequency of the rotating wing |
250:125rpm， Gear ratio 2:1, range of variation: 50:25~300:150 rpm |
||||
Temperature controlled inside the mixed room |
Adjustment range is 20-26 ° C |
||||
extremely largeload |
20Nm (conversion value on the high-speed rotating shaft side) |
||||
display resolution |
0.01Nm |
||||
Sample quantity to be measured |
The adjustment range is 1.0~200.0 grams |
||||
Measure the load at the beginning of the measurement |
0.001 ~ 0.999Nm |
||||
Load during peak detection |
099.99% |
||||
Load during torque detection |
0~9.999Nm |
||||
Check sensitivity |
0.001 ~ 9.999Nm |
||||
offset |
-90.0 ~90.0ml |
||||
printer |
print content |
Instructions |
meaning |
format |
unit |
date |
Measurement Date |
Year/Month/Day |
|||
Current setting |
A~T |
||||
Measurement number |
XX |
||||
sample |
Sample dosage |
XXX. X |
g |
||
oil |
Fuel supply amount when setting torque |
XX. XX |
ml |
||
oil |
Absorbed dose per 100 grams |
XXX. X |
ml/100g |
||
pattern |
Set torque |
XX. XXX |
%,Nm |
||
Maximum torque |
Torque at the end of measurement |
XX. XXX |
Nm |
||
oil |
Fuel supply at maximum torque |
XX. XX |
ml |
||
temperature |
Control temperature of mixing chamber |
XX |
℃ |
||
rotate |
Rotation frequency of the rotating wing |
XXX |
rpm |
||
Torque curve chart | |||||
Paper used |
Thermal paper roll |
||||
size |
503mm (width) * 415mm (height) * 732mm (depth) |
||||
weight |
About 40kg |
||||
External connection function |
RS-232C (used for transmitting data to a computer) |
||||
Connector for connecting buffer tank unit (optional) | |||||
5、 S500 Oil Absorption Tester Product Specifications:
Product Specifications (Continued)
accessories |
power cord |
1 |
YouTube |
1: 1/4 "× 1/8" × 0.5m (with joint points) |
|
Cleaning scraper/brush |
1 |
|
Clean Datong |
1: 510mm (W)*40mm(H)*328mm(D) |
|
Printer paper |
1 |
|
Instruction Manual |
1 (This manual) |
|
CD software for connecting computers |
1 |
|
connecting wire |
1 |
|
Calibration fixture |
Rod: 1, Hook: 1, 5kg Weight: 1 |
S500 Oil Absorption Tester - Carbon Black Negative Lithium Battery Powder Test
S500 Oil Absorption Tester - Carbon Black Negative Lithium Battery Powder Test
