Trough ore feeder

NegotiableUpdate on 11/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The trough feeder can be installed on the ground or lifted onto the discharge port of the ore bin

Product Details

chute feederIt can be installed on the ground or lifted onto the discharge port of the mine. The groove bottom plate undergoes reciprocating motion with a stroke rate of 20-60 times/min and a stroke of 20-200mm. The stroke can be adjusted appropriately by the eccentric wheel of the driving device, and the eccentricity is half of the stroke. According to some beneficiation plant production practices, for viscous ores, the eccentricity should not be less than 30mm.chute feederThe width of the trough is about 2-2.5 times the maximum particle size of the feed. A large trough feeder can meet the feeding needs of ores of various particle sizes. The most commonly used specification is 980 * 1240 trough feeder, with a feeding particle size of 1000-0mm, suitable as a feeding equipment for various jaw crushers