Supplier of fully automatic online moisture analyzer

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The WKT-R-50ZS online moisture analyzer from Weike Meituo brand is applied to all industries that require rapid moisture measurement. It can perform online detection of raw materials such as chemical raw materials, grains, and woodworking sawdust.

Product Details

WKT-R-50ZSOnline moisture analyzer

Model:	WKT-R-50ZS
measurement range：	1-50% (no water seepage in the material)
display resolution：	0.01%
measurement accuracy：	± 0.2-- ± 0.5% (different material textures have an impact)
measurement channel：	100
height range：	250mm±100mm
ambient temperature：	0-50℃
ambient humidity：	5-90%
repetitiveness：	≤0.2%
response time：	2-60 seconds
Filter range：	0-2.5%
Using power supply:	Voltage 220V, frequency 50HZ
power consumption：	100W
light interference：	Not affected by changes in external ambient light, the probe does not require a light shield

WKT-R-50ZS from Weike Meituo brandOnline moisture analyzerApplied to all industries that require rapid moisture measurement, it can perform online testing on chemical raw materials, grains, woodworking sawdust and other raw materials.

For the safe use of this instrument, please be sure to follow the following safety precautions during operation, maintenance, and repair.
1. Power supply: Confirm that the power supply matches the required power supply for this instrument before supplying power to it;
2. Power supply requirements: The power supply of this instrument should be equipped with an AC voltage regulator;
3. Protective grounding: To prevent electric shock, it is necessary to implement protective grounding before putting this instrument into use;
4. The necessity of protective grounding: Please do not cut or remove the protective grounding wires inside or outside this instrument, as doing so will pose great danger to the human body;
5. External wiring: After accurately connecting the protective grounding, connect the cables between the various components of the instrument;
6. Instrument maintenance and upkeep: This instrument has high voltage circuits inside, and hands must not be inserted into its interior when the instrument is powered on;
7. Replacing parts: When replacing instrument fuses and transformers, turning off the power switch of the main unit cannot ensure that the power is cut off. Therefore, please make sure to confirm that the main power has been cut off;
8. Power interface: The two 3-core cables at the bottom of the host casing are power interfaces for the host and probe, with a high voltage of 220V. Do not disassemble the instrument when it is powered on.