Sales full temperature cultivation shaker production

1QYC-2102 Full temperature cultivation shakerProduct Introduction:

The full temperature cultivation shaker is a laboratory equipment used for precision cultivation and preparation in scientific research, education, and production departments such as biology, microbiology, genetics, viruses, environmental protection, and medicine.

Its main features are:

1. The box has a large volume and is layered up and down, which can be used for heating and cooling. It has a wider range of applications and better comparative effects.

2. The thermal insulation material of the oscillating incubator is polyurethane foam, which has strong resistance to external cold and heat sources, good insulation and easy cleaning.

3. There is an air duct in the working chamber with uniform temperature distribution High temperature control accuracy.

4. The inner wall is made of high-quality stainless steel with excellent corrosion resistance. Turn on the lighting and observe the studio clearly through the glass door.

5. The constant temperature system can intelligently control the temperature by 37 ℃ with a fluctuation of less than 0.3 ℃.

6. The spring bottle rack is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments.

IIQYC-2102 Full temperature cultivation shakerTechnical indicators:

1. Capacity: 500L

2. Temperature control range: 5 ℃ -60 ℃;

3. Temperature control accuracy:+0.1 ℃ at 37 ℃;

4. Oscillation speed: Start at -300r/min;

5. Amplitude: 20mm cyclotron;

6. Temperature uniformity: ＜ 0.3 ℃;

7. Timing range: 0-9999min

8. Display mode: LCD display

9. Heating power: 380W

10. Compressor power: 250W

11. Tray size: 750mm × 460mm

12. Power AC: 220V 50Hz;

3、 Maintenance and upkeep:

The incubator should be placed in a clean, tidy, dry, and ventilated workspace; Before use, all control switches on the panel should be in a non working state; Place the test samples on the cultivation rack, and maintain an appropriate distance between each test bottle (or vessel) to facilitate the circulation of hot (cold) air convection; Connect the external power supply, place the power switch in the "on" position, and the indicator light will turn on; Select the cultivation temperature;

1. Adjust the temperature to the desired level and display the desired set temperature digitally. Please strictly follow the temperature controller manual when setting the temperature.

2. The actual temperature inside the working chamber is displayed digitally. If the ambient temperature is lower than the set temperature for heating. The incubator will automatically heat up, and if the ambient temperature is higher than the set temperature, the incubator will automatically cool down.

3. Observe the lighting switch inside the working chamber. After the work is completed, set all control switches to non working state and cut off the power supply.