-
E-mail
czfyyq8@163.com
-
Phone
13833708950
-
Address
No. 58 Guozhuang Industrial Zone
Product Categories
Xian County Fangyuan Construction Highway Experimental Instrument Factory
Quotation for semi-automatic asphalt fiber oil absorption tester
NegotiableUpdate on 04/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
JJYMX-II Fiber Oil Absorption Tester I. Purpose: The fiber oil absorption tester is used for measuring the oil absorption index of fibers used in asphalt pavement of highway engineering. 2、 Product features: 1. Uniform vibration speed and thorough mixing. 2. Use time relay settings to control vibration time. 3. Evenly mix and stir thoroughly. 4. 3. Technical parameters: Vibration time: 0-60min Power supply: 220v50HZ Sample sieve specifications: 0.5mm aperture/diameter 100MM Vibration speed: 240 times/minute Vibration amplitude 32mm Vibration time: Can be manually controlled
Product Details
JJYMX-IIFiber oil absorption tester
1、 Purpose:
The fiber oil absorption tester is used for measuring the oil absorption index of fibers used in asphalt pavement of highway engineering.
2、 Product features:
1. The vibration speed is uniform and the stirring is thorough.
2. Use time relay settings to control vibration time.
3. Evenly mix and stir thoroughly.
4. Can manually control the vibration time (achieved through power on/off)
3、 Technical parameters:
Vibration time:0-60min
power supply220v50HZ
Sample sieve specifications:0.5mm aperture/diameter 100MM
Vibration speed:240 times/minute Vibration amplitude32mm
Vibration time: Can be artificially controlled
4、 Usage:
1. According to the experimental requirements, weigh the corresponding mass of fiber and mineral oil mixture and pour it into the sample sieve on the instrument.
2. Set the vibration time, plug it into a 220V, 50Hz power supply, press the power switch to the "on" position.
3. After reaching the set time, the instrument automatically shuts down and emits an alarm sound.
4. Turn off the power switch, remove the sample sieve, weigh the sample sieve and the fiber that absorbs mineral oil, and calculate the oil absorption index according to the relevant formula.
5. When conducting the second experiment, simply repeat the above steps.
JJYMX-IIFiber oil absorption tester
1、 Purpose:
The fiber oil absorption tester is used for measuring the oil absorption index of fibers used in asphalt pavement of highway engineering.
2、 Product features:
1. The vibration speed is uniform and the stirring is thorough.
2. Use time relay settings to control vibration time.
3. Evenly mix and stir thoroughly.
4. Can manually control the vibration time (achieved through power on/off)
3、 Technical parameters:
Vibration time:0-60min
power supply220v50HZ
Sample sieve specifications:0.5mm aperture/diameter 100MM
Vibration speed:240 times/minute Vibration amplitude32mm
Vibration time: Can be artificially controlled
4、 Usage:
1. According to the experimental requirements, weigh the corresponding mass of fiber and mineral oil mixture and pour it into the sample sieve on the instrument.
2. Set the vibration time, plug it into a 220V, 50Hz power supply, press the power switch to the "on" position.
3. After reaching the set time, the instrument automatically shuts down and emits an alarm sound.
4. Turn off the power switch, remove the sample sieve, weigh the sample sieve and the fiber that absorbs mineral oil, and calculate the oil absorption index according to the relevant formula.
5. When conducting the second experiment, simply repeat the above steps.
Similar Product Recommend
