Quotation for imported insulated micro Euro multimeter

New generation handheld, insulated milliohm multimeter

METRHIT IN XTRA & METRHIT IN E-DRIVE

ahandheld multimetersatisfyAll requirements for electrical equipment testing.

Multimeter and milliohmmeter, insulation and coil tester, used forDiagnosis and maintenance of motors and electrical systems.

METRAHIT IM XTRA BT SW Set (supported)Bluetooth connectionandneweditionIZYTRON.IQ software）

Introduction to METRAHIT IM XTRA

METRAHIT IM XTRA&METRAHIT IM E-DRIVE is a portable and extremely sturdy multimeter designed specifically for on-site use. It is suitable for maintenance, repair, and diagnosis of motors, drive devices, and systems, such as in the automotive industry, power energy, and automation fields. The integrated instrument includes all measurement functions of TRMS digital multimeter, insulation resistance measurement function, milliohmmeter with 4-wire measurement technology, and coil short-circuit tester. Therefore, it is highly suitable for safety testing and diagnosis of electric and hybrid vehicles, as well as all types of motors.

Featured Features

■ modular battery

Standard quick replacement rechargeable lithium battery, optional WPC battery module for inductive charging, and battery module with USB port. The battery module can be replaced without interrupting the measurement circuit through the touch protection module socket.

■ Button/print function

Simply press one key to transfer the measurement value to the application software

■Programmable sequence

Test steps can be developed based on testing requirements

■Handle with buttons

Press start/stop and store on the test probe

Additional features

■Bluetooth or WIFI connection

■Color graphic display and simulated bar chart

■ABS: Automatic blocking socket to prevent misoperation

■Including IZYTRON.IQ Business Starter software

■DAkkS calibration certificate

ALL IN ONE

A single handheld instrument enables all safety testing and multimeter functions, facilitating troubleshooting and diagnosis of motor electrical equipment
■Insulation measurement up to 3.1G Ω, output voltage value 1000V

Using Kelvin clips/probes for 4-wire milliohm measurement
■Coil turn to turn short circuit test, 1kV test voltage
■Wide range of multimeter measurement functions

Interturn short circuit test

Perform surge testing within the inductance range of 10 μ H to 50 mH (100 Hz) in conjunction with the optional coil testing adapter.

Suitable for motors that comply with DIN standards, with a rated power of approximately 15 kVA to 80 MVA.

A universal three-phase adapter for medium rated power motors is currently being prepared.

Insulation resistance measurement

■When detecting interference voltage, the insulation resistance measurement is as high as 3.1G Ω; test voltages: 50V, 100V, 250V, 500V, and 1000V

■EN 61557 2/VDE 0413-2

■DAR: Dielectric Absorption Ratio Test

■PI: Polarization Index Test

Multimeter function

■Multimeter: VAC、DC，AC+DC，FIL，

AAC、DC、AC+DC，Hz, Ω, F, ° F/° C continuity/diode,%, RPM， low-pass filtering
■TRMS AC/AC+DC measures current/voltage up to 10/100 kHz

■Data retention function

■Data logger

■Safety level: CAT III 1000 V/CAT IV 600 V

Milliohm measurement

■Kelvin connection for 4-wire milliohm measurement, compensating for the effects caused by cable and contact resistance, which must be eliminated when measuring very small resistances. The measurement current can be set to 200 mA or 1A. The measurement of contact resistance, such as the contact resistance of welded and riveted joints, is carried out in potential bonding tests such as aircraft shell discharge brushes and fuel tanks. According to UN ECE R100 and GB/T18384, the measurement of potential balance is carried out in hybrid and electric vehicles.

■2-wire Rlow measurement, 200 mA test current. Complies with EN 61557-4/VDE 0413 Part 4 for low resistance measurements of grounding, protection, and equipotential bonding conductors.

■Integrated insulation and milliohmmeter