Quotation for domestic flue and exhaust duct soft object impact test device

Smoke duct resistance to soft object impact test device

Smoke duct resistance to soft object impact test deviceThe resistance to soft object impact of exhaust duct products used in residential kitchens and bathrooms. The product structure is reasonable and adopts a side open design, which is convenient for specimen installation; The sandbag is adsorbed by an electromagnet, which can be electrically lifted and released with one click.

1According to the standard:

1. JG/T194-2018 Residential Kitchen and Bathroom Exhaust Ducts;

2. JC/T854-2008 Glass Fiber Reinforced Cement Exhaust Pipe;

3. GB50096-2011 Residential Design Code;

2、 Technical parameters:

1. Impact height: 1 meter

2. Weight of sandbag: 10KG

3. Improvement method: Electric

4. Hanging method: Electromagnetic

5. Bracket distance: 1.8 meters

6. Wooden edge size: 50mm * 50mm * 800mm

7. Voltage: 220V/50HZ

8. Power: 480W

3、 Test method:

Use the entire exhaust duct product as the test specimen. Support the specimen horizontally on a wooden edge with a support distance of 1.8m, with dimensions of 50mm x 50mm in height and width, and a length greater than the cross-sectional edge length of the specimen. Use a 10kg standard sand bag above the middle of the specimen and adjust the height using electric lifting. Electromagnetic suction sand bag method, according to the specified impact height and number of impacts in this standard, can freely fall and impact the same part. A standard sandbag is made by packing 10kg of dry standard sand into a sewn canvas bag with a bottom diameter of 200mm and a height of 300mm. The impact height is the distance from the bottom of the sandbag to the impacted surface of the specimen. After 5 impacts, check if the specimen cracks.