Production of UV aging test chamber

NegotiableUpdate on 01/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Shanghai UV Climate Test Chamber Purpose: This equipment is suitable for assessing the adaptability of various products or materials, as well as plastics, coatings, rubber, paints, petrochemicals, automobiles, textiles and other industries, under environmental conditions such as light and condensation. It can be used for reliability testing in various scientific research institutions and factory and mining center laboratories

Product Details

1645770019(1).png

※ Advantages of company products

1. Having independent intellectual property rights and appearance design, as well as mastering the core technology of environmental testing chambers

2. The temperature control instrument adopts the touch screen TK1200 series, which uses a 7-inch TFT full-color touch screen controller with two operation modes: programmable and fixed value，PID self-tuning SSR control, adjustable from 0 to 999H99min, with adjustable temperature, light, condensation, and spray test cycles,OptionalR232 communication interface

3. The UV lamp tube is fully imported from the United States“ Q-Lab”series

4. The core electrical components are all sourced from domestic and foreign brands such as Schneider
5. The equipment adopts a fluorescent ultraviolet lamp with excellent UV spectrum similar to that in sunlight, and combines temperature control, humidity supply and other devices to simulate the factors such as high temperature, high humidity, condensation, dark rain cycle, etc. that cause discoloration, brightness, strength reduction, cracking, peeling, powdering, oxidation and other damage to materials in the UV range caused by sunlight.

6. At the same time, the synergistic effect between ultraviolet light and moisture weakens or fails the single light resistance or single moisture resistance of the material, making it widely used for evaluating the weather resistance performance of materials. The equipment provides sunlight UV simulation, has low maintenance costs, is easy to use, adopts controlled automatic operation, has a high degree of automation in the test cycle, good light stability, and high reproducibility of test results.

※ Product Technical Parameters

1. Studio size: approximatelyW1140 * H500 * D500mm (flat sample holder)

2. Overall dimensions:W1300*H1560*D600mm based on actual product

3. Temperature range:RT+10℃~70℃

4. temperaturebias：±3.0℃

5. Humidity range:≥ 93% R.H. (display uncontrollable)

6. Parallel center distance of lamp tube: 70mm

7. Distance between the test sample and the surface of the lamp tube:100 ± 10mm (adjustable)

8. light sourceUV-A

9. UVA-340 wavelength: 315-400nm, UVB-313 wavelength: 280-315nm

10. Standard test piece:75×150mm

11. Power:3.5KW

12. Power supply voltage:AC220V　50Hz

13. -Periodic or continuous spraying

14. UV irradiation intensity:0.35~1.0W/ m2

15. Bottled drinking water or distilled water should not be used, and unfiltered tap water should not be used; The equipment has an automatic water replenishment functionnoodles