Price of wet flue gas desulfurization equipment for boilers

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The green source wet flue gas desulfurization equipment is a device that allows dust containing gas to come into close contact with liquid (usually water), and uses the inertial collision of water droplets and particles or the sufficient mixing effect of water and dust, as well as other effects, to capture particles or increase or retain particles in a fixed container to achieve the separation effect of water and dust.

Product Details

Industrial dust removal cannot be separated from dust removal equipment. With the continuous maturity and improvement of dust removal technology, although common wet desulfurization and dust collectors still experience failures, the frequency of failures has significantly decreased compared to previous years. So let's take a look at it togetherGreen source wet process boiler desulfurization equipmentWhat are the troubleshooting methods for?

　　Green source wet process boiler desulfurization equipmentWhat are the common faults

① Lack of quality control in material selection or inadequate anti-corrosion measures for dust removal equipment;

② The nozzle diameter is too small, and there are large particles of floating slag or other substances in the circulating water, causing nozzle blockage;

③ If the water usage is not reasonable, especially in the integrated sulfur dust removal device, dust will accumulate in the wet dry intersection area;

④ The increase in the concentration of insoluble salts in the circulating water inside the dust collector, coupled with structural issues, leads to dust accumulation;

⑤ In some dust removal devices, due to unreasonable design, the flue gas contains water vapor. When the water vapor reaches a certain amount, it affects the normal operation of the equipment, easily corrodes the fan, chimney, and pipeline, and can also cause dust accumulation on the fan blades;

What are the methods for troubleshooting

① Pay special attention to whether the structure of the dehydrator is reasonable and see its dehydration effect;

② Take corrosion and insulation measures in areas prone to condensation, and if conditions permit, add flue gas heating;

③ If there is scaling or blockage, attention should be paid to the saturation of the products and desulfurizer in the solution. If the saturation is too high, the circulating water should be purified before entering the desulfurization and dust removal tower.

Kind reminder: After reading about common faults and troubleshooting of dust removal equipment, this has also reminded our customers to pay attention to quality when purchasing and do a good job in maintenance during operation to improve dust removal efficiency. Hangzhou Lvyuan Environmental Protection Equipment Factory has many years of experience in manufacturing dust removal equipment, which has been widely recognized by experts and industry insiders