-
E-mail
yishuosh@126.com
-
Phone
18019766383
-
Address
1st Floor, Building D, 6688 Songze Avenue, Qingpu, Shanghai
Product Categories
Shanghai Yishuo Experimental Instrument Factory
Price of rapid temperature change test chamber
NegotiableUpdate on 01/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The purpose of the rapid temperature change test chamber is to conduct reliability tests on industrial products at high, low, and constant humidity. Inspect the performance indicators of components and materials of electronic and electrical products, automotive and motorcycle products, aerospace products, marine weapons, universities, research institutions, and other related products under high and low temperature cycles and constant humidity changes. The product has a wide temperature control range, and its performance indicators meet the technical requirements of the national standard GB10592-89 for high and low temperature test chambers
Product Details
1Product attributes
1.1 Studio size 500 * 500 * 600mm (width x depth x height)
1.2 Overall dimensions are approximately 1100 * 1250 * 1880mm (width x depth x height)
1.3 The working form automatically alternates between low temperature, high temperature, and humid heat according to the program.
1.4 power supply380V±10%,50Hz±1Three phase four wire+grounding wire, protective grounding resistance less than4Ω
2Main technical parameters
2.1
Temperature and humidity parameters
Temperature range:-40 ℃~+80 ℃ Humidity range: 20~98%
降温速率：10 ℃/min (average no-load) Heating rate: 10 ℃/min (average no-load) Temperature stability: ± 0.5 ℃
Humidity stability:±2.5%RHTemperature deviation:±2.0℃Humidity deviation:±2.5%RH
Temperature fluctuation range:-40 ℃~+80 ℃ (any temperature point can be set) The test conditions can be executed under three different conditions (high temperature - low temperature - humid heat)
2.2 Noise level within 65dB
2.2 Meet the test standards
1. GB/T10586-89 Technical Conditions for Damp Heat Test Chamber
2、GB/T2423.1-2008 Low temperature test chamber test method
3、GB/T2423.2-2008 High temperature test chamber test method
4. GB/T2423.4-2008 Alternating Damp Heat Test Method
5. GB/T2423.22-2002 Temperature change test method
6. GJB150.9 Damp Heat Test Method
