Pointer pressure gauge

The Vika 113.13 is a liquid filled pressure gauge with a plastic casing. Liquid filling can effectively reduce the vibration and impact on internal components. Therefore, this pressure gauge is suitable for installation in machines or equipment with strong vibration and impact. The 113.13 pressure gauge adopts the proven Bourdon tube measurement system. The deformation of the Bourdon tube is transmitted through pressure and manifested on the dial. The plastic casing and cover are welded and sealed with O-rings, so they can withstand IP65 protection requirements.WIKA 113.13.063 Bourdon tube pressure gauge 25Mpa EN837-1.

The conventional dial sizes of the 113.13 pressure gauge are 40 [1&2] ', 50 [2]', and 63 [2&2] '], with an accuracy level of 2.5, and can be widely used in the industrial field. At the same time, installation brackets can be optionally selected, and axial installation can also be used to meet the installation of the dial. The nominal size version of 63 can be installed axially or with a front edge, which is generally only suitable for front installation.

WIKA 113.13.063 Bourdon tube pressure gauge 25Mpa EN837-1

application

Measurement points capable of measuring high dynamic pressure loads or vibrations

Suitable for gases that are not high viscosity or difficult to crystallize, and will not corrode copper alloy components

And liquid medium

hydraulic device

compressor

Features

Resistance to vibration and impact

Design in accordance with EN 837-1 or ASMEB40.100 standards

Nominal sizes: 40 [1 half '], 50 [2'], 63 [2 half ']

Range: up to 0 .. 40 MPa [0 ... 6,000 psi]