Original oxygen concentration meter supplier

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TORAY Toray RF-400-01 Zirconia Oxygen Concentration Meter from Japan is a brand new boutique! New boutique TORAY zirconia oxygen concentration meter from Japan!

Product Details

TORAY Toray RF-400-01 Zirconia Oxygen Concentration Meter from Japan is a brand new boutique!

New boutique TORAY zirconia oxygen concentration meter from Japan!

Specifications

shape	Desktop/panel mounted type
display mode	4-digit display (concentration display)
measurement range	10ppm～100vol%O2 0- 1/10/100/1000/10000ppm (1)/10/
measurement range	10 -20~10-0atm Cannot guarantee 0-10ppm range and below You can choose between a range of 0-10000ppm or a range of 0-1%
Sampling method	Built in pump continuous suction type
gas supply volume	1000-2000mL/min
Sensor gas quantity	60 ± 10 milliliters per minute
Gas connection port	INLET (sample gas inlet) Rc1/4 BYPASSOUT (bypass outlet) Rc1/4 OUTLET (sample gas outlet) Rc1/4
Comparing gases	atmosphere
a large amount of	About 6.5 kilograms
paint color	Munsell N3 matte paint (black)

feature

repetitiveness	1% (10000ppm) ≤ When measuring gas: ± 1% FS When 10ppm ≤ measured gas ≤ 1% (10000ppm): ± 2% FS (Cannot guarantee display range below 0-10ppm)
Air point stability	± 1% FS/24 hours

engineering specifications

Measurement value output	External output: 4-20mA, RS-232C
Concentration alarm output	LED display (upper and lower limits) Contact output: 2a output separately Contact capacity: AC30V/DC30V, 1A
Self diagnostic function	Preheating abnormality, thermocouple abnormality, internal temperature abnormality CPU abnormality, furnace temperature abnormality Asymmetric potential abnormality, sensor resistance value abnormality, AIR point calibration abnormality SPAN point calibration abnormality
Sample gas conditions	Must be free of flammable components, halogens, silica, corrosive components, and water droplets Pressure: 29.4 kPa or lower Pressure flow rate: 1000 to 2000 mL/min Temperature: 0 to 50 ° C Humidity: Dew point lower than ambient temperature
warm-up time	Within 6 minutes
power supply	Voltage: AC100V to 240V Required power capacity: 200VA Power consumption: 50W
Installation requirements	Installation location: indoor, non explosion proof area Environmental temperature: 0 to 50 ° C Environmental humidity: 20 to 85% RH (non condensing) Does not contain flammable components, halogens, silica or corrosive components
option	Activated carbon filter Cotton filter cartridge Silicon filter cartridge