Manufacturer of fully automatic UV fluorescence sulfur analyzer

KY-3000S UV fluorescence sulfur analyzer is one of the sulfur measuring instruments, widely used to determine the total sulfur content in finished oil, crude oil, distillate oil, petroleum gas, plastics, petrochemical and other products. Yes, the sulfur content analysis method. Compared with similar instruments at home and abroad, UV fluorescence sulfur analyzer has * sensitivity, * analytical accuracy, good stability and repeatability; A simple user interface that allows non professionals to reach a professional level. The main key components of this instrument use imported devices and multiple national technologies.

UV fluorescence sulfur analyzer KY-3000SFeatures:

1. The UV fluorescence sulfur analyzer adopts popular USB port communication, standard 24 bit data acquisition, and detection signal less than 1 microvolt.

2. Data can be stored, accessed, printed at will, and relevant problems can be solved based on on-site data files.

3. The main components of the UV fluorescence sulfur analyzer use * devices, which have better overall performance than similar domestic instruments and can replace imported products.

4. The high voltage of the photomultiplier tube (PMT) can be adjusted arbitrarily, and the calibration of the standard curve can be done using single point or multi-point calibration, making it easy to operate.

5. The UV fluorescence sulfur analyzer has * sensitivity, linearity, and reliable analysis results.

6. The software can run on all current operating systems and has strong adaptability. The instrument software has powerful functions.

UV fluorescence sulfur analyzer KY-3000SInstrument execution standard:

SH/T 0689, ASTM D5453 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products (Ultraviolet Fluorescence Method)

GB/T 34100-2017 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products by UV Fluorescence Method

Technical parameters of UV fluorescence sulfur analyzer:

1. Sample types: liquid, solid, and gas (corresponding injectors are required)

2. Determination method: UV fluorescence method (S)

3. Measurement range: 0.2mg/L~5000ppm~percentage content

4. Detection limit: 0.2mg/L (sulfur element)

5. Gas source requirements: High purity oxygen: above 99.98% High purity argon: above 99.98%

6. Temperature control range: Room temperature to 1300 ℃

7. Temperature control accuracy: ± 1 ℃

8. Power: 2KW