Maintenance of domestic sand and dust test chamber

Model: SC-500 Studio Size D × W × H 800 × 800 × 800: (mm)

Wuhan Sand and Dust Test Equipment SC-500 Sand and Dust Test Chamber Technical Parameters:
The nominal wire diameter of the metal sieve is 50 μ m, and the nominal spacing between wires is 75 μ m;
Airflow velocity: ≤ 2m/s or ≥ 2m/s;
Choose any time setting for continuous or periodic operation;
Sand and dust concentration: 2kg/m3 to 4kg/m3;
Experimental dust: Portland cement, smoke ash, etc;
Vibration time: adjustable from 0 to 999H
The structure of the SC-500 sand and dust test box for Wuhan sand and dust testing equipment:
Box shell material: High quality steel plate with spray coating treatment.
Inner liner material:. Imported SUS stainless steel light plate
Visual glass door, convenient for observing the condition of the tested sample inside the test chamber;
The bottom adopts high-quality fixed PU movable wheels
There is a dust replacement device at the bottom
Dust preheating system:
Using pipeline wrapped mica sheet heating ring for safe and stable heat dissipation
Dust detection equipmentEquipped with timed heating control
Circuit control system:
The dust detection equipment adopts an imported programmable controller (Golden Bell Moller) to effectively ensure that the test runs according to the standard
Equipped with vacuum actuators
Schneider executes electronic components
Automatic alternation of fan time
Vibration and stop vibration time automatically alternate
Vacuum pressure indication
The programmable controller has four output points to simultaneously complete program execution at four different times
Each output point of the programmable controller has two time periods for control (i.e. start time and stop time)
The programmable controller can individually or collectively control the time of the fan, dust vibration, and total test time
Protection system:
Non fuse protection switch, over temperature, overload, leakage, fully sheathed terminal block, with automatic shutdown protection, etc
The dust detection equipment is designed and manufactured strictly in accordance with the corresponding national standard technical parameters such as GB2423.37-89La shell dust prevention 2.1, GB7001-86 lamp shell protection 4.4.1, GB10485-89, etc., and simulated dust environment testing