-
E-mail
kundingjixie@163.com
-
Phone
13390853289
-
Address
No. 358 Songjiagang Road, Zhoushi Town, Kunshan City, Jiangsu Province
Product Categories
Kunshan Chunding Machinery Co., Ltd
LT-50 Roots blower manufacturer
NegotiableUpdate on 05/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product Name: Longtie Lushi Blower Product Model: LT-050 Caliber: 2 "Pressure Range: MMAQ: 0-8000MMAQ Airflow Range: M3/MIN: 0.15-2.92 Horsepower (HP): 2-7.5 (HP) Product Usage: Pressure conveying Application: Wastewater treatment, electroplating mixing, aeration and oxygenation, pneumatic conveying, air knife drying, cement machinery, papermaking equipment, chemical industry, etc. Pressure: 0~0.8 kgf/cm ² Air volume: 0.6~117m3/min Additionally, it can be designed with special materials
Product Details
Customized machining center steel plate protective cover
Steel plate protective coverTechnical data：
The steel telescopic guide rail protective cover is made of high-quality 2-3mm thick steel plate cold pressed, and can also be made of stainless steel according to requirements. Special surface polishing will increase its value. We can provide corresponding guide rail protection types (horizontal, vertical, inclined, horizontal) for all types of machine tools.
The protective cover structure we have developed varies depending on the operating speed and guide rail. We are equipped with polyurethane or brass sliders for speeds below 10m/min. We are equipped with rollers for speeds below 30m/min. In addition, a buffer system is required between the drive board, scraper board, and suction board. The purpose of the slider buffer system is to reduce collisions, noise, and friction.
The number of sections of the steel telescopic guide rail protective cover is important for its proportion, weight, and operating characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of large stretching to small compression should be between 3:1 and 5:1.
Steel plate protective coverStructural selection:
The reasonably priced standard structure (1) is suitable for most application industries, with a width of up to 900mm. When the width is large, it must be folded to improve lateral stability. This can be achieved with the ridge type (3) and the folded edge (4). In addition, the inclined type (2) can effectively make liquids and debris flow away.
The number of sections in a steel telescopic protective cover is important for its proportion, weight, and operational characteristics. Each section should be as long as possible to reduce the number of sections and lower costs. In general, the ratio of large stretch to small compression should be between 3:1 and 5:1.
Customized machining center steel plate protective cover
