How much is the integrated electromagnetic flowmeter

NegotiableUpdate on 04/02

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Electromagnetic flowmeters (EMF) are a new type of flow measurement instrument that rapidly developed in the 1950s and 1960s with the advancement of electronic technology. An electromagnetic flowmeter is an instrument that uses the principle of electromagnetic induction to measure the flow rate of a conductive fluid based on the induced electromotive force when the fluid passes through an external magnetic field. Electromagnetic flowmeter, electronic digital display quantitative controller for sewage liquid treatment

Product Details

The structure of an electromagnetic flowmeter mainly consists of a magnetic circuit system, a measuring conduit, electrodes, a housing, a lining, and a converter.

Magnetic Circuit System:Its function is to generate a uniform DC or AC magnetic field. The DC magnetic circuit is implemented using magnets, which has the advantages of a relatively simple structure and less interference from AC magnetic fields. However, it can easily polarize the electrolyte liquid inside the measuring tube, causing the positive electrode to be surrounded by negative ions and the negative electrode to be surrounded by positive ions, resulting in electrode polarization and an increase in internal resistance between the two electrodes, which seriously affects the normal operation of the instrument. When the diameter of the pipeline is large, the magnet is also large, bulky, and uneconomical. Therefore, electromagnetic flow meters generally use alternating magnetic fields and are excited by a 50HZ power supply.

Measurement catheter:Its function is to allow the tested conductive liquid to pass through. In order to divert or short-circuit the magnetic flux when the magnetic field lines pass through the measuring conduit, the measuring conduit must be made of non-magnetic, low conductivity, low thermal conductivity, and materials with certain mechanical strength, such as non-magnetic stainless steel, fiberglass, high-strength plastic, aluminum, etc.

Electrode:Its function is to generate an induced potential signal proportional to the measured value. The electrode is generally made of non-magnetic stainless steel and is required to be flush with the lining so that fluid can pass through without obstruction. Its installation position should be in the vertical direction of the pipeline to prevent sediment from accumulating on it and affecting measurement accuracy.

shellMade of ferromagnetic materials, it is the outer cover of the distribution system excitation coil and isolates the interference of external magnetic fields.

liningThere is a complete layer of electrical insulation lining on the inner side of the measuring conduit and the flange sealing surface. It directly contacts the liquid being measured, and its function is to increase the corrosion resistance of the measuring conduit and prevent the induced potential from being short circuited by the metal measuring conduit wall. The lining materials are mostly corrosion-resistant, high-temperature resistant, wear-resistant polytetrafluoroethylene plastics, ceramics, etc.

converter:The induced potential signal generated by liquid flow is very weak and greatly affected by various interference factors. The function of the converter is to amplify and convert the induced potential signal into a unified standard signal and suppress the main interference signal. Its task is to amplify and convert the induced potential signal Ex detected by the electrode into a unified standard DC signal.

Electromagnetic flowmeter, electronic digital display quantitative controller for sewage liquid treatment