How much is a gas vortex flowmeter

Overview

vortex flow meterIt has the advantages of wide measurement range, high accuracy, low pressure loss, stable performance, safety and reliability, and easy installation and use. Widely used in industries such as petroleum, chemical, power, pharmaceuticals, food, coal, environmental protection, textiles, metallurgy, papermaking, etc., it is suitable for flow measurement of various low viscosity fluids such as gases, liquids, steam, etc. It can also be used to measure turbid liquids containing small amounts of particles and impurities.

feature

◆ Seismic type:vortex flow meterThe use of seismic sensing for detection fundamentally eliminates the influence of external vibrations.

Explosion proof design: intrinsically safe Ex ib Ⅱ CT1-T6

Explosion proof Ex d Ⅱ CT1-T6

◆ Intelligent: On site, it can be operated through manual keys, magnetic sticks, or handheld devices

Modify instrument parameters and instrument range.

High precision: Measurement value of liquid ≤ ± 0.75%

Measurement value of gas/vapor ≤ ± 1%

Display mode: It can display the instantaneous flow rate and cumulative flow rate of the measured medium.

Output mode: 4-20mA current signal output/pulse signal and contact signal.

◆ Communication method: HART Protocol communication protocol; HART Protocol fieldbus

◆ Can achieve high temperature measurement of 400 degrees.

The liquid receiving part has no moving parts, is sturdy, durable, and maintenance free. Can be equipped with dual sensors. Can achieve high temperature of 400 degrees/high pressure of 250 kilograms

Technical Specifications

Measurement medium: liquid, gas, vapor

Medium viscosity: less than 10cp

Medium temperature: -50 ℃ -+400 ℃

Body material: 1Cr18Ni9Ti (supplied under other material agreements)

Sensor sealing: graphite gasket

Environmental temperature: -30 ℃ -+80 ℃

Nominal diameter: DN15- DN350

Measurement accuracy: Liquid: ± 1% of the measured value (ordinary)

± 0.5% of the measured value (special)

Gas: ± 1% of measured value

Range ratio: 20:1

Pressure rating: PN25, PN40

Connection method: clamp type DN15-DN150

Flange type DN15-DN300.

Insertion type DN350-- DN2000

Flow range: see attached table.

Protection level: IP67

Converter housing: die cast aluminum, painted

Supply voltage: 12-36VDC

Output signal:Two wire 4-20mA current output, programmable pulse output, sensor vortex frequency output.

On site display: Programmable to display instantaneous flow, cumulative flow, and percentage flow.