How much does the true density and porosity tester cost

NegotiableUpdate on 01/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

JL-1206B fully automatic true density/porosity tester, with an integrated machine design that is aesthetically pleasing and practical. Quickly measure the true density of various powders, block solids, and the porosity of porous materials. The measurement volume range is 0.01-100cm ³, with a built-in 100ml sample chamber and three types of sample tubes: 10ml, 30ml, and 60ml, which can be used according to testing needs. Equipped with an intelligent self checking program to automatically determine the sealing performance of the testing system. Fully automatic operation under computer control, with high testing accuracy and good repeatability.

Product Details

JL-1206BFully automatic true density/porosity tester

according toNational GB/T 24586-2009 standard for determination of true density and porosity,Equipped with computer operating software,Can quickly measure the true density of various powders, block solids, and the porosity of porous materials.Independently developed specialized testing software, computer-controlled throughout the testing process. Samples are placed into the testing chamber according to the operating procedures, and when the testing menu is clicked, the vacuum pump, solenoid valve, and other components immediately respond and start working simultaneously. Testing one sample takes about 3 minutes to complete, and can be repeated multiple times. The software automatically saves test data and supports online viewing and exporting of diverse report forms such as PDF, Excel, TXT, etc.

True density refers to the actual mass of solid material per unit volume in a dense state, that is, the density after removing internal pores or gaps between particles. True density is the most basic physical parameter of powder materials. After knowing the apparent volume of the sample, the closed pores and porosity of the porous material can be tested simultaneously. The traditional method for measuring true density is based on the Archimedes principle using a specific gravity bottle. This method is prone to reading errors and testing errors caused by sample dissolution when manually operatedThe ISO standard organization officially implemented the gas volume displacement method for analyzing the true density of powders, particles, etc. in 2014.

Application field

vTrue density testing: powder, particle, block, sheet, slurry, etc

vPorosity (open porosity, closed porosity) testing: block materials, foam materials, etc

JL-1206BFully automatic true density/porosity testerTest Principle

Testing method for true densityIt is to add the sample into a container with a known volume, seal the container and introduce a certain amount of nitrogen gas. The pressure sensor measures the internal pressure of the container, and then the gas inside the container diffuses to another container with a known pressure and volume. The pressure sensor measures the equilibrium pressure inside two connected containers, and the computer controls the fully automatic testing and analysis. According to the gas law, the true volume of the sample is obtained, and the true density is calculated by dividing the sample mass by the volume.

performance parameters

project	indicator
model	JL-1206B
Test Principle	Application of Archimedes' principle - gas displacement method
Test function	True density/porosity（Open cell rate, closed cell rate)
Analysis Stationquantity	1 piece，Comes with a 100ml sample chamber and is equipped with10ml、30ml、60mlthree typesthree kindsthree varieties
volume	Sample cylinderSample TypePowder, particle, block, foam and other solidsandslurry
、	Filter materials, etcMeasurement volume range
0.01～100cm³	test
efficiency	A single measurement takes about 3 minutes, and the number of repeated tests can be automatically settest accuracy
Accuracy better than ± 0.01%, resolution: 0.00001g/c	m³
Sample pretreatment	Drying or room temperature (depending on the sample)test modeVacuum type
，	Standard vacuum pump, pressure 0-130Kp
Test gas	99.99% nitrogen or helium (user provided)
Software operating system	Win 7 or above
interface method	RS232 or USB interface485host specifications350long20WideHigh 2mm
，	Weight 14kg
working environment	Working temperature: 5-35 ℃, working humidity<85%

working power supply

Voltage: AC220V ± 22V, frequency 50Hz, power consumption: vacuum type<200w>Instrument Featuresv1The instrument integrates a sample testing chamber, a sample measuring cylinder, a pressure sensor, and a control valve, ensuring the temperature stability of the entire testing system.The accuracy of true density testing can reach ± 0.0%，Resolution: 0.00001g/c

m³.v

Fully sealed overall structure,Effectively prevent powder splashing during the testing process.

vEquipped with automatic calibration and air path self checking functions, it can automatically determine the sealing performance of the testing system; Intelligent boost and relief control.vBuilt in standard 100ml testing chamber with fixed testing area, allowing for flexible selection of 10ml, 30ml, and 60ml sample measuring cylinders based on sample size and shape,

全自动真密度/孔隙率测定仪

For sample analysis and testing purposes.

vThe relative working pressure can be adjusted within the range of 5% -90% to reduce the impact of working pressure on easily deformed samples.

vPowder materials with strong activity and adsorption at room temperature or porous materials with small pores are suitable for vacuum type testing, because vacuum type testing first requires the extraction of all adsorbed gases inside the sample, and then the injection of nitrogen or helium gas, which is always a single gas during the testing process.

vThe intelligent steady flow system and high-speed, high-resolution sampler can quickly and accurately measure pressure curves, ensuring the resolution and repeatability of test data.