How much does it cost to sell a dust particle counter

Product Introduction:

HM-CL2 IntelligentDust particle counterThe confidence measurement and verification standards are based on the conditions specified in the national standard GB/T6167-2007 and calibration specification JJF1190-2008 to automatically determine the purification level. One sampling can simultaneously measure the number of dust particles in six particle size channels and display the number and variation of particles in each channel.

Scope of application:

Satisfy the pharmaceutical industry (pharmaceutical factories, drug testing institutes, hospital operating rooms, etc.); The electronics industry (semiconductor factories, production and processing of precision machinery, etc.); Food hygiene industry (precision processing of dairy products, sealed meat products, seasoning foods, agricultural products, etc.); Manufacturers of filters, inspecting the quality and efficiency of filters, etc; The inspection of clean rooms (areas) required for precision machining and precision testing in the fields of optics, aerospace, etc.

According to the standard:

National standard: GB/T6167-2007Dust particle counterPerformance testing method

Cleanliness level determination standard: ISO14644FS209E, new version GMP (dynamic/static)

Calibration Specification: JJF-1190-2008

Characteristics of HM-CL2:

1. Android version 7.1 provides a better user experience.

2. Built in temperature and humidity sensor, environmental pressure sensor

3. The core component of the light scattering sensor significantly eliminates stray light in the cavity, greatly improving the signal-to-noise ratio. This makes the measurement more accurate and reliable.

4. Calculated at a 95% confidence level (UCL), the counting results can be converted into m3 and ft3

5. According to the classification and regulations of purification levels, the purification level is automatically determined, which is convenient to use.

6. Equipped with audit tracking function, searchable, traceable, and controllable, in compliance with FDA21CFRPART11 specification

7. Supports WiFi and Bluetooth transmission, data can be uploaded wirelessly; At the same time, it supports copying data from USB flash drives without driver insertion and removal.

8. Configure a regulatory platform, and the test results can be directly transmitted wirelessly to the platform for long-term and short-term analysis of cleanliness, assisting in management.

9. Equipped with a new generation high-speed thermal printer, the desired particle size channel can be selected for flexible printing of results.

10. AC/DC dual-use, built-in rechargeable lithium battery, environmentally friendly and durable, can support continuous sampling for more than 6 hours.

Technical indicators:

Sampling volume: 2.83L/min (0.1cfm)

Six particle size channels: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 (μ m)

Self purification time: ≤ 10 minutes

Measurement repeatability relative deviation: ≤± 10%

Working environment: 15-35 ℃, 10-85% RH

Sampling period: can be set arbitrarily from 1 second to 99 minutes

Sampling delay: ≤ 99s

Measurement interval: ≤ 999s

Sampling method: single, ≤ 99 times (customized), continuous

Alarm level: Class100-Class300000 (FED209E standard); Or Level 5-9 (ISO14464-1 standard)

Light source: Imported semiconductor laser diode (with a lifespan of over 30000 hours)

Screen display mode: 7-inch color touch screen

Charging time: 2 hours

Design working time: 8 hours

Average power: 7.5W

Built in battery: 74Wh (16.8V/5Ah)

Charger: 50W (16.8V/3A)