-
E-mail
franksong@v-river.com
-
Phone
13842538275
-
Address
No. 132 Binjiang Middle Road, Sun Century Plaza
Dandong Deze Technology Co., Ltd
franksong@v-river.com
13842538275
No. 132 Binjiang Middle Road, Sun Century Plaza
The INTEK flowmeter in the United States can simultaneously measure the flow rate of ultra small liquids and gases. For decades,INTEKThe flowmeter has proven its performance in various important practical applications. Nowadays, these flow meters are commonly used in various aerospace applications of NASA, including applications on space stations.All INTEK flow meters have the characteristics of small pressure drop, low maintenance due to the absence of moving parts, and chemical corrosion resistance. In addition, the combination of TU and TUL sensors with an unobstructed flow channel and strict quality management in accordance with the ISO-9001:2000 quality assurance system ensures the quality of INTEK flow meters. The main features of its product are as follows:
■ Apply TU/TUL sensors with accessible fluid channels
No need for maintenance or repair;
The same flowmeter can measure both liquids and gases;
Ultra fine flow measurement. The measurement of liquid can reach as low as 10cc/day, and the measurement of gas can reach as low as 20sccm;
A flowmeter can measure four different liquids.
Easy to use, ready to install.
Measurement of viscous and impurity containing liquid micro mass flowmeterThis flowmeter can be applied to most uniform liquids, slurries, or high viscosity fluids that flow continuously. This flowmeter has even been used to measure almost all liquids, from liquefied gases to thick oils or pastes. Corrosive chemical raw materials, high molecular weight hydrocarbons, water, and aqueous liquids.
The following is a selection case for measuring viscous liquids with impurities in practice:Measurement of viscous and impurity containing liquid micro mass flowmeter
Medium: White oil
|
Model: 210-X-TU1/16(1/4E)(SS)(HP)(3/8”MNPT)(MB)-4/20-VRSP-24V-FM mediumKJ-40 I (white oil70%Amine compounds30%Diameter≤45μm) Customer required traffic range:0 – 50 g/hr Calibrated flow range:0.0025 - 0.05 kg/hrOperating Temperature40℃ Operating temperature:-4-+40℃ Ambient temperature-40-+60℃ High pressure:4.0Mpa User operation pressure:3.5 Mpa Viscosity value:100cp Specific gravity:840 kg/m^3 Sensor type: straight tube Liquid receiving material:SS316 Shell materialPVC Measurement tube joint:3/8-inch MNPT Calibration unit:kg/hr. Power supply:24 V DC output:4-20mA On site monitor: none Compliant with American explosion-proof standards,NEMA 4X (Class I Div. I Grps B, C&D areas, Class I, Zone 1, IIB+H2, T6=60℃) connecting cable:Free length provided10Inches (Exceeding Part)28yuan/Inches, length200Inches) |